Effects of phosphoric acid on the surface morphology and reflectance of AlN grown by MBE under Al-rich conditions
Source abstract
Abstract
Abstract Aluminium nitride (AlN) films grown by molecular beam epitaxy (MBE) were exposed to phosphoric acid (H 3 PO 4 ) heated to 70 °C for 10 min. The H 3 PO 4 treatment removed excess aluminium (Al) from the surface of AlN grown under Al-rich conditions. A side effect of the H 3 PO 4 process was the formation of hexagonal etch pits up to 180 nm in size. Reflectance measurements were performed before and after the removal of excess Al from the film surface. Excess surface Al in the form of droplets was found to strongly influence the reflectance of the AlN films. Consequently the Al surface droplets (AlSD) introduced an error into film thickness values derived from Lorentz oscillator model fitting of the specular reflectance. The film thickness measurement error due to excess surface Al was quantified as a function of the AlSD surface coverage percentage. The effect of AlSD on reflectance-based film thickness measurements must be taken into account when using AlN grown in the Al droplet regime to characterize the nitrogen (N) growth rate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: GaN-based semiconductor devices and materials · ZnO doping and properties · Ga2O3 and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.