journal article·2022-11

Characterization of Sn4P3 film formed by aerosol deposition for lithium-ion battery anode with liquid electrolyte and solid polymer electrolyte

Daiki Azuma, Ryoji Inada

Thin Solid Films· Volume 761
Publisher page

Abstract

We fabricated Sn4P3 thin films by aerosol deposition process. Sn4P3 powder pulverized by a ball milling was used as raw material and splayed onto a glass or a stainless steel substrate to form the film via impact consolidation. Electrochemical property as a lithium-ion battery anode was characterized using both organic liquid electrolyte and poly (ethylene oxide) based solid polymer electrolyte. The initial reversible capacities in both a liquid-type and a solid-polymer cells with a lithium metal as a counter electrode attained to approximately 900 mAh g − 1, while the capacity retention of Sn4P3 film electrode after galvanostatic cycling in a cell with a polymer electrolyte was much better than in a cell with a liquid electrolyte. It was also found that the microstructural change of the film after galvanostatic cycling in polymer-type cell is significantly suppressed compared to the film in a liquid-type cell. These results suggest that high-capacity alloy-based anode shows better electrochemical performance in solid-state batteries with deformable solid electrolyte.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Current status and future perspectives of lithium metal batteries10.1016/j.jpowsour.2020.228803 ↗
2. Electrochemical lithiation of tin and tin-based intermetallics and composites10.1016/S0013-4686(99)00191-7 ↗
3. Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells10.1016/j.jpowsour.2006.09.084 ↗
4. A review of the electrochemical performance of alloy anodes for lithium-ion batteries10.1016/j.jpowsour.2010.07.020 ↗
5. Tin-based amorphous oxide: a high-capacity lithium-ion-storage material10.1126/science.276.5317.1395 ↗
6. The insertion mechanism of lithium into Mg2Si anode material for Li-Ion batteries10.1149/1.1392650 ↗
7. Improved electrochemical performance of ternary Sn–Sb–Cu nanospheres as anode materials for lithium-ion batteries10.1007/s12598-014-0303-6 ↗
8. Facile synthesis of hollow Cu3P for sodium-ion batteries anode10.1007/s12598-021-01718-z ↗
9. Reaction mechanism of tin phosphide anode by mechanochemical method for lithium secondary batteries10.1149/1.1738679 ↗
10. Enhancement of capacity and cycle-life of Sn4+δP3 (0 ≤ δ ≤ 1) anode for lithium secondary batteriess10.1016/j.jpowsour.2004.09.007 ↗
11. On the mechanism of the electrochemical reaction of tin phosphide with lithium10.1149/1.2234733 ↗
12. Improving the cycling stability of Sn4P3 anode for sodium-ion battery10.1016/j.jpowsour.2017.08.060 ↗
13. Progressive lithiation mechanism of Sn4P3 nanosheets as anodes for Li-ion batteries10.1016/j.apsusc.2021.149247 ↗
14. Preparation, structure and ionic conductivity of lithium phosphide10.1016/0167-2738(89)90438-4 ↗
15. Electrochemical performance of all-solid-state lithium batteries with Sn4P3 negative electrode10.1016/j.jpowsour.2013.01.061 ↗
16. Room temperature impact consolidation (RTIC) of fine ceramic powder by aerosol deposition method and applications to microdevices10.1007/s11666-008-9163-7 ↗
17. An overview of the aerosol deposition method: process fundamentals and new trends in materials applications
18. Application of electrolyte using novel ionic liquid to Si thick film anode of Li-ion battery10.1016/j.jpowsour.2010.12.027 ↗
19. Anode properties of thick-film electrodes prepared by gas deposition of Ni-coated Si particles10.1016/j.jpowsour.2010.10.013 ↗
20. Electrochemical Na-insertion/extraction properties of Sn–P anodes10.5796/electrochemistry.83.810 ↗
21. Characterization of Sn4P3–carbon composite films for lithium-ion battery anode fabricated by aerosol deposition10.3390/nano9071032 ↗
22. Characterization of as-deposited Li4Ti5O12 thin film electrode prepared by aerosol deposition method10.1016/j.jpowsour.2013.12.084 ↗
23. Preparation of thick-film LiNi1/3Co1/3Mn1/3O2 electrodes by aerosol deposition and its application to all-solid-state batteries10.1016/j.jpowsour.2014.09.038 ↗
24. Preparation of thick-film electrode-solid electrolyte composites on Li7La3Zr2O12 and their electrochemical properties10.1016/j.jpowsour.2015.10.101 ↗
25. Properties of lithium trivanadate film electrodes formed on garnet-type oxide solid electrolyte by aerosol deposition10.3390/ma11091570 ↗
26. 5V-class bulk-type all-solid-state rechargeable lithium batteries with electrode-solid electrolyte composite electrodes prepared by aerosol deposition10.1016/j.jpowsour.2018.03.017 ↗
27. A Li-free inverted-stack all-solid-state thin film battery using crystalline cathode material10.1016/j.elecom.2019.106494 ↗
28. Low-resistive LiCoO2/Li1.3Al0.3Ti2(PO4)3 interface formation by low-temperature annealing using aerosol deposition10.1002/ente.202001059 ↗
29. Preparation of lithium aluminum titanium phosphate electrolytes thick films by aerosol deposition method10.1111/j.1551-2916.2011.04551.x ↗
30. Properties of aerosol deposited NASICON-type Li1.5Al0.5Ge1.5(PO4)3 solid electrolyte thin films10.1016/j.ceramint.2015.05.062 ↗
31. Thick-films of garnet-type lithium ion conductor prepared by the Aerosol Deposition Method: the role of morphology and annealing treatment on the ionic conductivity10.1016/j.jpowsour.2017.06.061 ↗
32. Properties of garnet-type Li6La3ZrTaO12 solid electrolyte films fabricated by aerosol deposition method10.1016/j.pnsc.2017.06.002 ↗
33. Powder aerosol deposition as a method to produce garnet-type solid ceramic electrolytes: a study on electrochemical film properties and industrial applications10.1002/ente.202100211 ↗
34. Electrical conducting properties of Na2Zn2TeO6 thick films fabricated by aerosol deposition10.1016/j.matlet.2022.132640 ↗
35. Influence of the structure of the anion in an ionic liquid electrolyte on the electrochemical performance of a silicon negative electrode for a lithium-ion battery10.1016/j.jpowsour.2016.10.111 ↗