Oriented wedge-like hillocks on Al-0.5 wt.%Cu/TiN/SiO2/Si multilayer structure
Source abstract
Abstract
Abstract The wedge-like hillock, accompanied with the rounded hillock, was thermally induced on the surface of Al-0.5 wt.%Cu/TiN/SiO 2 /Si multilayer structure after heat treatment at 400°C for 30 min. Atomic force microscopy, scanning electron microscopy, and transmission electron microscopy were used to characterize the topography and microstructure of the wedge-like hillock as well as the large rounded hillock. The wedge-like hillock can be divided into the wedge-like extrusion which stands alone, and the wedge-like plateau which appears next to the large rounded hillock. It consists of more than 200 original columnar grains which extrude upwards to form an inclined surface with an off-surface angle of 0.6–3.5°. It is found that the wedge-like hillock is virtually oriented toward one of two in-plane Si〈011〉 cleavage directions. The oriented configuration of wedge-like hillock can be correlated to the asymmetric distribution of Al(111) texture in the Al-0.5 wt.%Cu film. Dislocation creep is proposed to be the most likely formation mechanism of the wedge-like hillock. In contrast, the rounded hillock (0.2–0.7 μm) is about one order of magnitude higher than the wedge-like hillock (0.025–0.09 μm). It has a newly formed Al crystallite lying over more than 200 original columnar grains. Grain boundary diffusion is considered to be the dominant mechanism responsible for the formation of the rounded hillock.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Copper Interconnects and Reliability · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.