journal article·2009-04

Hot wire chemical vapor deposition: limits and opportunities of protecting the tungsten catalyzer from silicide with a cavity

P.A. Frigeri, O. Nos, S. Bengoechea, C. Frevert, J.M. Asensi, J. Bertomeu

Thin Solid Films· Volume 517· Issue 12
Publisher page

Abstract

Hot Wire Chemical Vapor Deposition (HW-CVD) is one of the most promising techniques for depositing the intrinsic microcrystalline silicon layer for the production of micro-morph solar cells. However, the silicide formation at the colder ends of the tungsten wire drastically reduces the lifetime of the catalyzer, thus limiting its industrial exploitation. A simple but interesting strategy to decrease the silicide formation is to hide the electrical contacts of the catalyzer in a long narrow cavity which reduces the probability of the silane molecules to reach the colder ends of the wire. In this paper, the working mechanism of the cavity is elucidated. Measurements of the thickness profile of the silicon deposited in the internal walls of the cavity have been compared with those predicted using a simple diffusion model based on the assumption of Knudsen flow. A lifetime study of the protected and unprotected wires has been carried out. The different mechanisms which determine the deterioration of the catalyzer have been identified and discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Keppner · Appl. Phys.A · 1999 · 69 · 16910.1007/s003390050987 ↗
2. Cifre · Appl. Phys. A: Mater. Sci. Process. · 1994 · 59 · 64510.1007/BF00331926 ↗
3. Schropp · 2002 · vol. 715 · A26
4. Ishibashi · Thin Solid Films · 2003 · 430 · 5810.1016/S0040-6090(03)00071-3 ↗
5. Ledermann · Thin Solid Films · 2001 · 395 · 6110.1016/S0040-6090(01)01208-1 ↗
6. Holt · 2002 · vol. 715 · A23
7. Mahan · Mater. Res. Soc. Symp. Proc. · 2001 · 609
8. Iwaniczko · 2003 · vol. 762 · 387
9. Honda · Thin Solid Films · 2008 · 516 · 82610.1016/j.tsf.2007.06.208 ↗
10. Present · 1958
11. Sali · Thin Solid Films · 2001 · 395 · 6610.1016/S0040-6090(01)01209-3 ↗
12. Honda · J. Non-Cryst. Solids · 2000 · 266 · 10010.1016/S0022-3093(99)00747-4 ↗
13. van der Werf · Thin Solid Films · 2003 · 430 · 4610.1016/S0040-6090(03)00136-6 ↗
14. Knoesen · Thin Solid Films · 2008 · 516 · 82210.1016/j.tsf.2007.06.210 ↗
15. Grunski · Thin Solid Films · 2008 · 516 · 81410.1016/j.tsf.2007.06.143 ↗
16. Honda · Thin Solid Films · 2008 · 516 · 82610.1016/j.tsf.2007.06.208 ↗