Spray coating vs. immersion for self-assembly of gemini perfluorinated phosphonic acids on indium tin oxide
Source abstract
Abstract
Abstract Self-assembled monolayers (SAMs) are widely used to engineer the surface properties of metals and metal oxide layers. This article reports the fabrication of gemini perfluorinated phosphonic acids SAMs on indium tin oxide (ITO). The self-assembled monolayers are to be used for patterning nickel lines by electroplating on ITO in order to obtain low-cost conductor grids on heterojunction solar cells. The aim is to develop large-scale, low-cost processes that will both reduce production times and produce strong, covalently bonded monolayers of phosphonic acids on metal oxide surfaces along with uniform coverage. The gemini perfluorinated phosphonic acid provides extremely high hydrophobicity at the surface of ITO with a static contact angle of water above 115° and a remarkably low hysteresis of approximately 15° between advancing and receding contact angles. Well-known octadecylphosphonic acid is used as a reference material. Two deposition methods, by immersion and by spray-coating, are compared for the self-assembly of the molecules. The effect of the solvents used during the immersion, spray-coating, and rinsing steps are investigated. The surface properties are characterized by atomic force microscopy, contact angle measurements, and attenuated total reflectance Fourier-transform infrared spectroscopy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Molecular Junctions and Nanostructures · Organic Electronics and Photovoltaics · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Molecular engineering of surfaces using self-assembled monolayers10.3184/003685005783238462 ↗
2. Formation of alkane-phosphonic acid self-assembled monolayers on alumina: an in situ SPR study10.1002/sia.3116 ↗
3. Covalent surface modification of oxide surfaces10.1002/anie.201306709 ↗
4. Self-assembled monolayers of thiolates on metals as a form of nanotechnology10.1021/cr0300789 ↗
5. Quantifying thiol-gold interactions towards the efficient strength control10.1038/ncomms5348 ↗
6. Direct measurement of the adsorption kinetics of alkanethiolate self-assembled monolayers on a microcrystalline gold surface10.1021/la00021a066 ↗
7. Formation and structure of self-assembled monolayers10.1021/cr9502357 ↗
8. Patterned self-assembled monolayers formed by microcontact printing direct selective metalization by chemical vapor deposition on planar and nonplanar substrates10.1021/la00008a029 ↗
9. Structure and reactivity of alkylsiloxane monolayers formed by reaction of alkyltrichlorosilanes on silicon substrates10.1021/la00088a035 ↗
10. Static solvent contact angle measurements, surface free energy and wettability determination of various self-assembled monolayers on silicon dioxide10.1016/j.tsf.2006.04.006 ↗
11. Self-assembled monolayers of dodecyl and hydroxy-dodecyl phosphates on both smooth and rough titanium and titanium oxide surfaces10.1021/la011459p ↗
12. Influence of alkyl chain length on phosphate self-assembled monolayers10.1021/la700474v ↗
13. Self-assembled monolayer growth of octadecylphosphonic acid on mica10.1021/la9510689 ↗
14. Phosphonic acids for interfacial engineering of transparent conductive oxides10.1021/acs.chemrev.6b00061 ↗
15. Protective films of stearic and octadecylphosphonic acid formed by spray coating10.5599/jese.739 ↗
16. Functionalization of nickel oxide using alkylphosphonic acid self-assembled monolayers10.1016/j.tsf.2008.06.055 ↗
17. Patterning indium tin oxide and indium zinc oxide using microcontact printing and wet etching10.1021/la015543g ↗
18. Liquid phase formation of alkyl- and perfluoro-phosphonic acid derived monolayers on magnesium alloy AZ31 and their chemical properties10.1016/j.jcis.2011.04.039 ↗
19. Tuning the work function of polar zinc oxide surfaces using modified phosphonic acid self-assembled monolayers10.1002/adfm.201401493 ↗
20. Tuning of noble metal work function with organophosphonate nanolayers10.1063/1.4890486 ↗
21. Adsorption studies of a phosphonic acid on ITO: film coverage, purity, and induced electronic structure changes10.1039/c3cp54637c ↗
22. Conjugated phosphonic acid modified zinc oxide electron transport layers for improved performance in organic solar cells10.1021/am505182c ↗
23. Patterning solar cell metal grids on transparent conductive oxides using self-assembled phosphonic acid monolayers10.1016/j.tsf.2019.137624 ↗
24. Self-assembled hole transporting monolayer for highly efficient perovskite solar cells
25. Conformal monolayer contacts with lossless interfaces for perovskite single junction and monolithic tandem solar cells10.1039/C9EE02268F ↗
26. Phosphonic acid modification of the electron selective contact: interfacial effects in perovskite solar cells10.1021/acsaem.9b00141 ↗
27. Monolithic perovskite/silicon tandem solar cell with 29% efficiency by enhanced hole extraction10.1126/science.abd4016 ↗
28. A. Bulusu et al., “Efficient modification of metal oxide surfaces with phosphonic acids by spray coating,” Langmuir, vol. 29, no. 12, pp. 3935–3942, 2013.10.1021/la303354t ↗
29. Surface modification of TiO2 layer with phosphonic acid monolayer in perovskite solar cells: effect of chain length and terminal functional group10.1016/j.orgel.2019.105583 ↗
30. Understanding organic film behavior on alloy and metal oxides10.1021/la904120s ↗
31. Self-assembly and bonding of alkanephosphonic acids on the native oxide surface of titanium10.1021/la010649x ↗
32. Phosphonic acid modification of indium-tin oxide electrodes: combined XPS/UPS/contact angle studies10.1021/jp710893k ↗
33. Adsorption kinetics of organophosphonic acids on plasma-modified oxide-covered aluminum surfaces10.1021/la8000619 ↗
34. Use of Hansen Solubility Parameters to Identify Cleaning Applications for ‘Designer’ Solvents
35. Stabilization of the work function of indium tin oxide using organic surface modifiers in organic light-emitting diodes10.1063/1.2998599 ↗
36. Optical properties of an octadecylphosphonic acid self-assembled monolayer on a silicon wafer10.1016/j.tsf.2008.09.021 ↗
37. Study of the resistance of SAMs on aluminium to acidic and basic solutions using dynamic contact angle measurement10.1021/la062233v ↗
38. Delivering octadecylphosphonic acid self-assembled monolayers on a Si wafer and other oxide surfaces10.1021/jp062811g ↗
39. Socrates · 2001
40. Fluorinated silane self-assembled monolayers as resists for patterning indium tin oxide10.1021/la0342114 ↗
41. Semi-fluorinated phosphonic acids form stable nanoscale clusters in Langmuir-Blodgett and self-assembled monolayers10.1039/b813742k ↗
42. Study of Perfluorophosphonic acid surface modifications on zinc oxide nanoparticles10.3390/ma10121363 ↗
43. Gaining control of pattern formation of dewetting liquid films10.1088/0953-8984/13/21/319 ↗
44. An experimental study of high Weber number impact of methoxy-nonafluorobutane C4F9OCH3 (HFE-7100) and n-heptane droplets on a heated solid surface10.1016/S0017-9310(02)00103-5 ↗