article·2019-06-18

Fabrication of nanographene using nickel supported by a tungsten mesh

Akira Heya, Ryo Yamasaki, Naoto Matsuo

Publisher page

Abstract

Abstract A method for the fabrication of nanographene films using pentacene and H2 gas was proposed. A tungsten (W) mesh, a W mesh coated with nickel (Ni) (Ni/W mesh), and a W mesh supporting Ni (WNi mesh) were used as catalysts to synthesize the nanographene films. The decomposition temperature of the pentacene molecule using the Ni/W mesh was lower than that for the W mesh. The nanocarbon films prepared using the Ni/W and the WNi meshes had different film properties compared with those made using the W mesh. These nanocarbon films had an absorption peak similar to that of graphene around 270 nm. In addition, on the WNi mesh, which had a Ni surface area ratio of 3%, pentacene molecules coexisted with 6,13-dihydropentacene molecules. It is found that the pentacene multimer yield and the polymerization reaction rate were enhanced using the WNi mesh. The WNi mesh is useful as a catalyst for the rapid formation (0.03 nm/s) of nanocarbon films consisting of nanographene at temperatures below 250 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Graphene research and applications · Advancements in Battery Materials · Carbon Nanotubes in Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.