article·2019-03-21

Ink-jet Bi2O3 films and powders for CO2 capture and self-cleaning applications

E. Luévano-Hipólito, Leticia M. Torres‐Martínez, Carlos A. Triana, S.W. Lee

Publisher page

Abstract

Abstract Thin films and powders of bismuth oxide were synthesized by a combined sol-gel and ink-jet printing method. The films were deposited over glass substrates, which were submitted to a heat treatment to promote the formation of the tetragonal polymorph of bismuth oxide (β-Bi2O3), while the powders crystallized in the monoclinic phase (α-Bi2O3). The capacity of the materials to capture CO2 was assessed at room temperature and it was followed by X-ray powder diffraction, scanning electronic microscopy, and gas chromatography. The β-Bi2O3 film with 3 layers exhibited the highest CO2 capture (1.5 mgCO2), while α-Bi2O3-powders captured 4.2 mgCO2. Nevertheless, if the results are normalized per mass of material, the efficiency obtained with the film was twice higher (82 mgCO2 gBi2O3−1) than by powders (42 mgCO2 gBi2O3−1). When exposed to CO2, both Bi2O3 samples (powders and thin films) were converted to Bi2O2CO3; however, some residual Bi2O3 was detected in the samples. The resulting Bi2O3/Bi2O2CO3 mixture was applied as a photocatalyst to remove methylene blue in order to evaluate the sample's self-cleaning performance. The results indicated that a combination of these two materials promoted a synergistic effect related to a more efficient charge transfer due to their favorable band positions. This effect was able to promote up to 45% of removal of the pollutant on the Bi2O3/Bi2O2CO3 surface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Catalytic Processes in Materials Science · Advanced Photocatalysis Techniques · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.