journal article·2019-01

Effect of Ga introduction during the second stage of a coevaporation process of Cu(In,Ga)Se2 layers at low temperature on polyimide substrates

V. Achard, M. Balestrieri, S. Béchu, M. Jubault, M. Bouttemy, L. Lombez, T. Hildebrandt, N. Naghavi, A. Etcheberry, D. Lincot, F. Donsanti

Thin Solid Films· Volume 669
Publisher page

Abstract

Abstract A proper control of Ga concentration profile is mandatory to achieve high efficiency Cu(In,Ga)Se2 (CIGS) solar cells. At low temperature, deep gradients, detrimental for carriers' diffusion, are obtained when CIGS is deposited with a standard three-stage process: an optimization of the process is needed. In this study, we show the impact of a modify three-stage process on the depth of the notch by introducing Ga flux during the second stage from 0 nm/min to 1.1 nm/min. A higher open circuit voltage compensated by a lower short current density is obtained due to higher band gap energy. The surface and the bulk of the CIGS layer was analyzed at the end of the second stage by coupling different characterization techniques: glow discharge optical emission spectroscopy, Raman and X-ray photoelectrons spectroscopy. The presence of binary compounds as well as a Ga enrichment at the end of the second stage are observed when Ga is introduced during the second stage.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Frontier
2. Potassium-induced surface modification of Cu(In,Ga)Se2 thin films for high-efficiency solar cells10.1038/nmat3789 ↗
3. Effects of Ga addition to CuInSe2 on its electronic, structural, and defect properties10.1063/1.121548 ↗
4. A new approach to high-efficiency solar cells by band gap grading in Cu(In,Ga)Se2 chalcopyrite semiconductors10.1016/S0927-0248(00)00274-9 ↗
5. Model for electronic transport in Cu (In, Ga) Se2 Solar Cells10.1002/(SICI)1099-159X(199811/12)6:6<407::AID-PIP230>3.0.CO;2-U ↗
6. Characterization and modelling of chalcopyrite solar cells10.1016/S0040-6090(00)01736-3 ↗
7. Gallium gradients in Cu(In,Ga)Se 2 thin-film solar cells: Gallium gradients in CIGS thin-film solar cells10.1002/pip.2485 ↗
8. Band-gap engineering in Cu(In,Ga)Se2 thin films grown from (In,Ga)2Se3 precursors10.1016/0927-0248(95)00122-0 ↗
9. Luque · 2003
10. Highly efficient Cu(in,Ga)Se2 solar cells grown on flexible polymer films10.1038/nmat3122 ↗
11. Technological aspects of flexible CIGS solar cells and modules10.1016/j.solener.2004.04.010 ↗
12. Study of Gallium Front Grading at Low Deposition Temperature on Polyimide Substrates and Impacts on the Solar Cell Properties10.1109/JPHOTOV.2018.2866195 ↗
13. Effect of Ga content on defect states in CuIn1−xGaxSe2 photovoltaic devices10.1063/1.1485301 ↗
14. SHORT COMMUNICATION: ACCELERATED PUBLICATION: Diode characteristics in state-of-the-art ZnO/CdS/Cu(In1−xGax)Se2 solar cells10.1002/pip.626 ↗
15. Study of Cu(In,Ga)Se2 Thin Film Growth at Low Temperature on Polyimide Substrate in a Multistage Coevaporation Process for Photovoltaic applications
16. Graded band-gap Cu(in,Ga)Se2 thin-film solar cell absorber with enhanced open-circuit voltage
17. Crystal growth and diffusion in Cu(In,Ga)Se2 chalcopyrite thin films10.1016/0040-6090(93)90461-W ↗
18. Chemical engineering of Cu(in,Ga)Se2 surfaces: an absolute deoxidation studied by X-ray photoelectron spectroscopy and Auger electron spectroscopy signatures, E-MRS
19. XPS and Raman study of slope-polished Cu(in,Ga)Se2 thin films10.1007/s13391-016-6044-y ↗
20. X-ray photoelectron and Auger electron spectroscopic analysis of surface treatments and electrochemical decomposition of CuInSe2 photoelectrodes10.1063/1.335341 ↗