Study of back reflectors for thin film silicon solar cells
Source abstract
Abstract
Abstract In this study, the reflection properties of transparent conductive oxide (TCO) films i.e. aluminum doped zinc oxide (ZnO:Al) and boron doped zinc oxide (ZnO:B) films plus aluminum (Al) films or white polyvinyl butyral (PVB) foils, which are usually used as the combined back reflectors of thin film silicon solar cells, are investigated. Sputtered ZnO:Al films were etched in diluted hydrochloric acid (1%) to achieve rough surface structures while textured ZnO:B films were directly prepared by a low pressure chemical vapor deposition technique. It is found that the rough TCO/Al reflectors show a low total reflection, which is mainly due to the parasitic absorption by the surface plasmons at the rough TCO/Al interfaces as well as the absorption in the TCO films. Differently, the rough TCO/white PVB foil reflectors display a slightly high light reflection regardless of the influence of the rough interface without the excitation of surface plasmons. Thus, the TCO/white PVB foil back reflectors could be a good candidate with respect to light utilization when they are applied in thin film silicon solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies · Silicon Nanostructures and Photoluminescence
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.