Mechanical properties of nanoscaled TiC/Fe multilayers deposited by ion beam sputtering technique
Source abstract
Abstract
Abstract TiC/Fe nanoscaled multilayers with layer thickness of l TiC =l Fe =λ/2 (where λ is the modulation wavelength of the multilayers) ranging from 0.9 to 12.5 nm have been deposited on Si(111) wafers by ion beam sputtering techniques at nearly ambient temperature. Low-angle and high-angle X-ray diffraction (XRD) examinations were used to analyze the structural properties of the films. Mechanical properties of these multilayers were also thoroughly studied. The hardness and elastic modulus of these multilayers were determined using a Nanoindenter. The nanohardness showed a strong dependence on the modulation wavelength. It was found that the multilayer hardness was greater than the volume-weighted-mean of the component hardness. With the modulation wavelength adjusted, the multilayer was even harder than its hard component (TiC). A maximum hardness of 27.47 GPa, approximately one time larger than that of the rule-of-mixture values, was found at λ=10.2 nm. A possible mechanism for hardening is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.