journal article·2019-11

Photoluminescence quenching of green synthesized manganese doped zinc oxide by sodium iodide doped Polypyrrole polymer

Srimathi Krishnaswamy, Veena Ragupathi, Puspamitra Panigrahi, Ganapathi Subramaniam Nagarajan

Thin Solid Films· Volume 689
Publisher page

Abstract

Abstract Nanocrystalline ZnO particles doped with Manganese(Mn) were prepared by a green synthesis method using cucum sativa fruit pulp extract as biosolvent. Different concentration of Mn(II) was incorporated in ZnO to study the dopant effect in ZnO. The X-ray diffraction pattern data shows a decrease in grain size for Mn-ZnO from 46 nm to 31 nm with the increase in Mn concentration. Scanning electron microscopy reveals spherical morphology with a decrease in particle size while increasing the dopant concentration. With an increase in Mn doping the band gap is observed to reduce from 3.14 eV to 3.01 eV which is due to band tailing effect. The luminescence of ZnO is quenched by increasing the dopant ions concentration which might be attributed to the quenching ability of Mn ions in the ZnO lattice. While 5% Mn doped ZnO (MZO) showed improved crystallinity, enhanced optical property and reduced particle size, we have chosen this concentration for thin film fabrication using Dip coating unit. At the same time, sodium iodide(NaI) doped Polypyrrole(PPy) powder synthesized by the chemical polymerization method exhibited a band gap of 2.57 eV. As the bandgap of NaI doped PPy falls in the higher range of visible region, it was taken further to make nanocomposite thin film by dip coating with 5% MZO nanoparticles. The photoluminescence intensity of the MZO-NaI PPy nanocomposite thin film got reduced drastically suggesting better electron-hole separation efficiency at the interface of MZO-NaI PPy nanocomposite thin film. Due to the improved electron-hole separation efficiency of the synthesized nanocomposite, it might find a possible application in the hybrid solar cell.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Conducting polymers and applications · ZnO doping and properties · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Indium phosphide nanowires as building blocks for nanoscale electronic and optoelectronic devices10.1038/35051047 ↗
2. Photosensitization of ZnO nanowires with CdSe quantum dots for photovoltaic devices10.1021/nl070430o ↗
3. Zinc oxide nanostructured biosensor for glucose detection
4. Applications of ZnO in organic and hybrid solar cells10.1039/c1ee01873f ↗
5. Photoluminescence and photocatalytic activity of Mn doped ZnO nanoparticles
6. Enhanced visible light photocatalysis by manganese doping or rapid crystallization with ZnO nanoparticles10.1016/j.matchemphys.2011.07.018 ↗
7. Magnetic properties of Mn doped ZnO tetrapod structures10.1063/1.1645312 ↗
8. High-temperature ferromagnetism in Mn-doped ZnO nanowires10.1063/1.2217707 ↗
9. Synthesis and magnetic properties of Mn doped ZnO nanowires10.1016/j.ssc.2007.02.017 ↗
10. Photoluminescence properties peculiar to the Mn-related transition in a lightly alloyed ZnMnO thin film grown by pulsed laser deposition10.1063/1.2209719 ↗
11. Influence of Mn doping on the microstructure and optical property of ZnO10.1016/j.mssp.2008.04.005 ↗
12. First-principles study of native point defects in ZnO10.1103/PhysRevB.61.15019 ↗
13. Facile synthesis of ZnO nanoparticles for the photocatalytic degradation of methylene blue10.1007/s10971-016-4297-4 ↗
14. Biosynthesis of Au, Ag and Au–Ag nanoparticles using edible mushroom extract10.1016/j.saa.2009.02.037 ↗
15. Soybeans as a phytochemical reservoir for the production and stabilization of biocompatible gold nanoparticles10.1002/smll.200800525 ↗
16. Electronic structure and magnetism of Mn-doped ZnO nanowires10.3390/nano5020885 ↗
17. The effect of dopant on structural, thermal and morphological properties of DBSA-doped polypyrrole10.1007/s13726-012-0119-x ↗
18. High molecular weight soluble polypyrrole10.1016/S0379-6779(01)00384-8 ↗
19. Synthesis of electrically conducting organic polymers: halogen derivatives of polyacetylene, (CH)x10.1039/c39770000578 ↗
20. Effect of different iodide salts on ionic conductivity and structural and thermal behavior of rice-starch-based polymer electrolytes for dye-sensitized solar cell application10.1007/s11581-015-1385-3 ↗
21. Detailed electrical measurements on sago starch biopolymer solid electrolyte10.1080/01411594.2014.944911 ↗
22. Study of optical and electrical property of NaI-doped PPy thin film with excellent photocatalytic property at visible light
23. Origin of defect related green emission in rod shaped ZnO synthesized by eco friendly approach
24. Ultrasound assisted miniemulsion polymerization for preparation of polypyrrole–zinc oxide (PPy/ZnO) functional latex for liquefied petroleum gas sensing10.1021/ie301698g ↗
25. Enhanced photoconductive properties of a simple composite coaxial nanostructure of zinc oxide and polypyrrole10.1039/c2jm34525k ↗
26. Polypyrrole sensitized ZnO nanorod arrays for efficient photoelectrochemical splitting of water10.1016/j.physb.2013.03.021 ↗
27. Polypyrrole-ZnO nanohybrids: effect of CSA doping on structure, morphology and optoelectronic properties10.1007/s13204-012-0149-x ↗
28. Mn-doped ZnO nanocrystalline thin films prepared by ultrasonic spray pyrolysis10.1016/j.jallcom.2008.03.123 ↗
29. Effect of 50 MeV Li3 + irradiation on structural and electrical properties of Mn-doped ZnO10.1088/0953-8984/23/20/205801 ↗
30. Structural and magnetic properties of Ni doped CeO2 nanoparticles10.1166/jnn.2010.2751 ↗
31. Spectroscopy of photovoltaic and photoconductive nanocrystalline Co2+-doped ZnO electrodes10.1021/jp051878l ↗
32. ZnO nanoparticles with controlled shapes and sizes prepared using a simple polyol synthesis10.1016/j.spmi.2008.01.004 ↗
33. Annealing effect on nano-ZnO powder studied from positron lifetime and optical absorption spectroscopy10.1063/1.2401311 ↗
34. Defect dynamics in annealed ZnO by positron annihilation spectroscopy10.1063/1.2035308 ↗
35. Morphology-controlled ZnO nanomaterials for enhanced photoelectrochemical performance10.1166/mex.2011.1008 ↗
36. Synthesis and characterization of Mn-doped ZnO nanocrystals10.1021/jp049960o ↗
37. Magnetic and optical properties of manganese doped ZnO nanoparticles synthesized by sol–gel technique10.1016/j.spmi.2013.04.029 ↗
38. Modifications in structural, morphological, optical and photocatalytic properties of ZnO:Mn nanoparticles by sol-gel protocol10.1016/j.mssp.2018.07.016 ↗
39. Optical and photocatalytic properties of Mn doped flower-like ZnO hierarchical structures10.1016/j.optmat.2016.07.014 ↗
40. Mn-doping-induced photocatalytic activity enhancement of ZnO nanorods prepared on glass substrates10.1016/j.apsusc.2017.12.246 ↗
41. Dependence of energy gap on x and TinZn1-x Mnx Se: the role of exchange interaction10.1103/PhysRevB.33.8207 ↗
42. Spectroscopic and structural characterization of electrochemically grown ZnO quantum dots10.1063/1.369049 ↗
43. Defect emissions in ZnO nanostructures10.1088/0957-4484/18/9/095702 ↗
44. Synthesis of colloidal Mn2+:ZnO quantum dots and high-TC ferromagnetic nanocrystalline thin films10.1021/ja048427j ↗
45. Structure and photoluminescence of Mn-passivated nanocrystalline ZnO thin films10.1016/S0022-0248(03)01143-6 ↗
46. Time-resolved photoluminescence study of the stimulated emission in ZnO nanoneedles
47. Effect of reaction temperature on surface morphology and photoelectric properties of ZnO grown by hydrothermal method in mixed solvent10.1007/s10854-015-3109-x ↗
48. Linear and nonlinear optical properties of cobalt-doped zinc aluminum glass ceramics10.1063/1.1555699 ↗
49. Effects of replacing thiophene with 5,5-dimethylcyclopentadiene in alternating poly(phenylene), poly(3-hexylthiophene), and poly(fluorene) copolymer derivatives10.1039/C5PY01247C ↗
50. Study of ZnO nanoparticles based hybrid nanocomposites for optoelectronic applications10.1063/1.4942525 ↗
51. Chemical changes and photoluminescence properties of UV modified polypyrrole10.1016/S1452-3981(23)14002-8 ↗
52. Properties and photocatalytic performance of Polypyrrole and polythiophene modified g-C3N4 nanocomposites10.1039/C5RA02883C ↗
53. Nanochannel morphology of polypyrrole–ZnO nanocomposites towards dye sensitized solar cell application10.1039/c3ta12796f ↗
54. Influence of crystallinity and energetics on charge separation in polymer–inorganic nanocomposite films for solar cells10.1038/srep01531 ↗
55. Enhanced photoresponse of inkjet-printed ZnO thin films capped with CdS nanoparticles10.1021/jz900008y ↗