article·2000-12-01

Effect of heavy ion implantation on the properties of tetrahedral amorphous carbon film

J. Shi, Zhen Sun, X. Shi, Shu Ping Lau, Beng Kang Tay, J. Pelzl

Publisher page

Abstract

Abstract The influence of energetic Au + beam implantation on tetrahedral amorphous carbon (ta-C) films prepared by the filtered cathodic vacuum arc technique was studied. The ta-C films were implanted by 2 MeV Au + with dose varying from 10 12 –3×10 14 cm −2 . The as-deposited and ion implanted films were characterized using atomic force microscopy, Raman spectroscopy and ellipsometry. All films have a smooth surface morphology with RMS roughness less than 0.3 nm over an area of 1 μm 2 . The Raman spectra of the as-deposited and ion implanted films all show a G peak at approximately 1565 cm −1 and a D peak at approximately 1395 cm −1 . The intensity ratio of the D to G peak, I D / I G , remains unchanged (∼0.50) for films implanted with an ion dose below 10 13 cm −2 , and increases to 2.10 for the film implanted with an ion dose of 3×10 14 cm −2 . The Tauc optical band gap decreases from 2.05 eV for the as-deposited film to 1.40 eV for the film implanted with an ion dose of 10 13 cm −2 , and becomes very close to zero for the films implanted with an ion dose greater than 3×10 13 cm −2 . Both Raman and ellipsometric results show that a large percentage of carbon atoms become sp 2 -bonded in the films implanted with large ion doses.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · High-pressure geophysics and materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.