Simple solution-processed titanium oxide electron transport layer for efficient inverted polymer solar cells
Source abstract
Abstract
Titanium oxide (TiOX) is an effective electron transport layer (ETL) in polymer solar cells (PSCs). We report efficient inverted PSCs with a simple solution-processed amorphous TiOX (s-TiOX) film as an ETL. The s-TiOX film with high light transmittance was prepared by spin-coating titanium(IV) isopropoxide isopropanol solution on indium tin oxide coated glass in inert and then placed in air under room temperature for 60 min. The introduction of s-TiOX ETL greatly improved the short circuit current density of the devices. PSCs based on poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester and poly(4,8-bis-alkyloxy-benzo[1,2-b: 4,5-b'] dithiophene-alt-alkylcarbonyl-thieno[3,4-b] thiophene):[6,6]-phenyl-C71-butyric acid methyl ester using s-TiOX film as ETL shows high power conversion efficiency of 4.29% and 6.7% under the illumination of AM 1.5G, 100 mW/cm(2), which shows enhancements compared to the conventional PSCs with poly(styrenesulfonate)doped poly(ethylenedioxythiophene) as anode buffer layer. In addition, the device exhibits good stability in a humid ambient atmosphere without capsulation. The results indicate that the annealing-free, simple solution processed s-TiOX film is an efficient ETL for high-performance PSCs. (C) 2014 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Device physics of polymer:fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗
2. Polymer solar cell modules prepared using roll-to-roll methods: knife-over-edge coating, slot-die coating and screen printing10.1016/j.solmat.2008.12.012 ↗
3. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
4. A complete process for production of flexible large area polymer solar cells entirely using screen printing—first public demonstration10.1016/j.solmat.2008.12.001 ↗
5. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
6. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
7. 10.2% power conversion efficiency polymer tandem solar cells consisting of two identical sub-cells10.1002/adma.201300964 ↗
8. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
9. Metal oxide applications in organic-based photovoltaics10.1179/026708311X13081465539809 ↗
10. Interface materials for organic solar cells10.1039/b921624c ↗
11. Metal oxide nanoparticles as an electron-transport layer in high-performance and stable inverted polymer solar cells10.1002/adma.201201958 ↗
12. Air-stable inverted flexible polymer solar cells using zinc oxide nanoparticles as an electron selective layer10.1063/1.2945281 ↗
13. Development of inverted organic solar cells with TiO2 interface layer by using low-temperature atomic layer deposition10.1021/am302252p ↗
14. Role of thin n-type metal-oxide interlayers in inverted organic solar cells10.1021/am300549v ↗
15. Solution-processed MoO3 thin films as a hole-injection layer for organic solar cells10.1021/am200729k ↗
16. Role of tungsten oxide in inverted polymer solar cells10.1063/1.3076134 ↗
17. Inverted organic solar cells with sol–gel processed high work-function vanadium oxide hole-extraction layers10.1002/adfm.201101402 ↗
18. Mechanistic insights into UV-induced electron transfer from PCBM to titanium oxide in inverted-type organic thin film solar cells using AC impedance spectroscopy10.1021/am100312v ↗
19. New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer10.1002/adma.200501825 ↗
20. The influence of ZnO nanostructures on the structure, optical and photovoltaic properties of organic materials10.1016/j.tsf.2013.08.012 ↗
21. Design and synthesis of indole-substituted fullerene derivatives with different side groups for organic photovoltaic devices10.1016/j.orgel.2012.12.010 ↗
22. Performance and stability studies of inverted polymer solar cells with TiO2 film as a buffer layer10.1007/s00339-013-7626-2 ↗
23. Performance improvement of inverted polymer solar cells with different top electrodes by introducing a MoO3 buffer layer10.1063/1.3026741 ↗
24. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
25. Diketopyrrolopyrrole-based oligomer modified TiO2 nanorods for air-stable and all solution processed poly(3-hexylthiophene):TiO2 bulk heterojunction inverted solar cell10.1039/c2jm30334e ↗
26. Doping of the metal oxide nanostructure and its influence in organic electronics10.1002/adfm.200801639 ↗
27. Antireflection and band gap extension effects of ZnO nanocrystalline films grown on ITO-coated glasses by low temperature process10.1016/j.mseb.2012.11.008 ↗
28. Synthesis of a low band gap polymer and its application in highly efficient polymer solar cells10.1021/ja9064975 ↗
29. Synthesis of narrow size distribution sub-micron TiO2 spheres10.1016/S0022-3093(02)01607-1 ↗
30. Optimized monolayer grafting of 3-aminopropyltriethoxysilane onto amorphous, anatase and rutile TiO210.1016/j.susc.2009.11.027 ↗
31. The adsorption of liquid and vapor water on TiO2(110) surfaces:the role of defects10.1016/0039-6028(95)00859-4 ↗
32. Studies of surface wettability conversion on TiO2 single-crystal surfaces10.1021/jp983386x ↗
33. Self-assembled and cross-linked fullerene interlayer on titanium oxide for highly efficient inverted polymer solar cells10.1021/cm1032404 ↗
34. High-performance inverted polymer solar cells with solution-processed titanium chelate as electron-collecting layer on ITO electrode10.1002/adma.201104863 ↗
35. Solution-processed tungsten oxide as an effective anode buffer layer for high-performance polymer solar cells10.1021/jp304878u ↗
36. Solution-processed zinc oxide thin film as a buffer layer for polymer solar cells with an inverted device structure10.1021/jp1003984 ↗