journal article·2019-07Open access

Multifunctional Ti based carbonitride coatings for applications in severe environments

C.I. Pruncu, A. Vladescu, A.C. Parau, M. Braic, K.D. Dearn, L.R. Constantin, V. Braic

Thin Solid Films· Volume 682

Abstract

Abstract In this work, the influence of NbZr and ZrSi addition to TiCN coatings are studied, aiming for their use as protective layers for parts subjected to severe corrosion and wear. The coatings with C/N ratios ranging from 0.4 to 2.5 were deposited using the cathodic arc technique in a mixture of N2 and CH4 gases, on 316 stainless steel discs and Si (111) wafers. All the coatings exhibited residual compressive stresses, with values ranging from approximately-2.4 GPa to −3.5 GPa. The addition of Si led to an increase in hardness, regardless of the C/N ratio. All coatings with high C/N ratio (~2.5) presented slightly lower stress values and superior performance in 3.5% NaCl corrosive solutions, the best performance being obtained for the TiSiZrCN coating, which exhibited the highest protective efficiency to corrosion (97.8%), due to its low corrosion current density (1.734 μA/cm2) and high polarization resistance (31.775 kΩ). The tribological tests, performed at 23 °C and 250 °C, indicated that abrasion and oxidation were the predominant wear mechanism for all coatings. At 23 °C, the friction coefficients of the coated specimens were significantly lower than those of the uncoated samples. When the collective performance across all of the experimental parameters was assessed, the coatings with C/N of about 2.5 proved to be the most suitable candidates to be used in severe service conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (98)

Show source-provided references
1. Technical specifications change request 3-15-99
2. Hocking · 1989
3. Surface modification of biomedical AISI 316L stainless steel with zirconium carbonitride coatings10.1016/j.apsusc.2015.02.191 ↗
4. Tool steel coatings based on niobium carbide and carbonitride compounds10.1016/j.surfcoat.2012.07.052 ↗
5. Tribological and corrosion behaviors of titanium carbonitride coatings in simulated biological fluid10.1016/S1452-3981(23)06638-5 ↗
6. Fatigue behavior of TiN and TiCN coated a rotor turbine steel10.1142/S0217979203019277 ↗
7. Transition metal carbides, nitrides, and Carbonitrides
8. Critical review on the elastic properties of transition metal carbides, nitrides and carbonitrides10.1016/S0925-8388(97)00297-1 ↗
9. Microstructure, mechanical and tribological properties of TiCN nanocomposite films deposited by DC magnetron sputtering10.1016/j.surfcoat.2011.05.034 ↗
10. Influence of the C content on the mechanical and tribological properties of the TiCN coatings deposited by LAFAD technique10.1016/j.surfcoat.2011.02.032 ↗
11. Effect of applied bias voltage on corrosion-resistance for TiC1-xNx and Ti1-xNbxC1-yNy coatings10.1016/j.apsusc.2009.11.042 ↗
12. Spark plasma sintering of TiyNb1−yCxN1−x monolithic ceramics obtained by mechanically induced self-sustaining reaction10.1016/j.msea.2012.02.071 ↗
13. Arc PVD-coated cutting tools for modern machining applications10.1016/S0257-8972(97)00519-7 ↗
14. A contact area function for Berkovich nanoindentation: application to hardness determination of a TiHfCN thin film10.1016/j.tsf.2014.02.044 ↗
15. Elastic modulus of TiHfCN thin films by instrumented indentation10.1016/j.tsf.2012.08.022 ↗
16. Investigation of the mechanical and structural properties of Ti-Hf-C-N arc PVD coatings
17. Carbon doping to improve the high temperature tribological properties of VN coating10.1016/j.triboint.2016.01.054 ↗
18. Microstructure, mechanical, and tribological properties of Ag-free and Ag-doped VCN coatings10.1016/j.surfcoat.2017.10.036 ↗
19. Superhard TiAlCN coatings prepared by radio frequency magnetron sputtering10.1016/j.tsf.2015.02.068 ↗
20. Effect of carbon on TiAlCN coatings deposited by reactive magnetron sputtering10.1016/j.surfcoat.2008.06.175 ↗
21. Room temperature pulsed laser deposited (Ti,Al)CxN1−x coatings—chemical, structural, mechanical and tribological properties10.1016/j.tsf.2004.05.089 ↗
22. Constitution and microstructure of magnetron sputtered nanocomposite coatings in the system Ti-Al-N-C10.1016/j.tsf.2005.07.290 ↗
23. Tribological properties and thermal stability of TiAlCN coatings deposited by ICP-assisted sputtering10.1016/j.surfcoat.2013.04.041 ↗
24. The significance of carbon on the microstructure of TiAlN{single bond}C coatings deposited by reactive magnetron sputtering10.1016/j.apsusc.2006.05.003 ↗
25. Reversible tuning of the surface chemical reactivity of titanium nitride and nitride-carbide diffusion barrier thin films10.1021/cm902107h ↗
26. Process and properties of TiC0.7N0.3-based cermet coating deposition on steel by electrospark deposition technique
27. Evaluation of duplex (Zr,Al)CN coatings with improved tribological performance
28. (Ti,Cr,Nb)CN coatings deposited on nitrided high-speed steel by cathodic arc method10.1016/j.surfcoat.2011.03.030 ↗
29. Investigation of thin titanium carbonitride coatings deposited onto stainless steel10.1016/j.tsf.2012.08.012 ↗
30. Characterization of thick and thin film SiCN for pressure sensing at high temperatures10.3390/s100201338 ↗
31. Friction and wear behaviors of AlTiCrN coatings by cathodic arc ion plating at high temperatures10.1557/jmr.2014.403 ↗
32. Characteristics of arc plasma deposited TiAlZrCN coatings10.1016/j.surfcoat.2008.02.005 ↗
33. Corrosion and tribological behaviour in a 3.5% NaCl solution of vacuum arc deposited ZrCN and Zr–Cr–Si–C–N coatings10.1177/1350650118774132 ↗
34. Effects of Zr, Nb, or Si addition on the microstructural, mechanical, and corrosion resistance of TiCN hard coatings10.1002/maco.201508737 ↗
35. Corrosion resistance, mechanical properties and biocompatibility of Hf-containing ZrCN coatings10.1016/j.tsf.2012.12.100 ↗
36. ZrNbCN thin films as protective layers in biomedical applications10.1016/j.surfcoat.2011.08.016 ↗
37. Development of TiCN-based cermets: mechanical properties and wear mechanism10.1016/j.ijrmhm.2012.07.001 ↗
38. First-principles based calculation of binary and multicomponent phase diagrams for titanium carbonitride
39. Boron-nitride and boron-carbonitride nanotubes: synthesis, characterization and theory10.1080/00018730903562033 ↗
40. Physical vapor deposition tool coatings10.1016/0257-8972(95)02616-9 ↗
41. Tribology of carbon nitride coatings
42. Nanomechanical and nanotribological properties of carbon-based thin films: a review10.1016/j.ijrmhm.2009.08.003 ↗
43. Corrosion and tribological behaviour in a 3.5% NaCl solution of vacuum arc deposited ZrCN and Zr–Cr–Si–C–N coatings
44. How morphology determines the charge storage properties of Ge nanocrystals in HfO210.1016/j.scriptamat.2015.10.028 ↗
45. Fairley · 2005
46. Bestimmung der Grösse und der Inneren Struktur von Kolloidteilchen Mittels Röntgenstrahlen
47. Effects of the substrate on the determination of thin lm mechanical properties by nanoindentation10.1016/S1359-6454(01)00328-7 ↗
48. On the determination of film stress from substrate bending: STONEY's formula and its limits
49. Comparison of the corrosion of bulk amorphous steel with conventional steel10.1016/j.corsci.2009.09.016 ↗
50. Electrochemical polarization: I. a theoretical analysis of the shape of polarization curve10.1149/1.2428496 ↗
51. Estimation of corrosion current by the analysis of polarization curves: electrochemical kinetics mode10.1134/S1023193514020025 ↗
52. Corrosion and tribological performance of quasi-stoichiometric titanium containing carbo-nitride coatings10.1016/j.arabjc.2016.09.009 ↗
53. Investigation of low-reflective ZrCN-PVD-arc coatings for application on medical tools for minimally invasive surgery10.1016/S0257-8972(01)01222-1 ↗
54. Study of (Zr,Ti)CN, (Zr,Hf)CN and (Zr,Nb)CN films prepared by reactive magnetron sputtering10.1016/j.tsf.2011.01.375 ↗
55. Characterization of multi-principal-element (TiZrNbHfTa)N and (TiZrNbHfTa)C coatings for biomedical applications10.1016/j.jmbbm.2012.02.020 ↗
56. Vincent Crist · 1999
57. Design of carbide-based nanocomposite thin films by selective alloying10.1016/j.surfcoat.2010.06.017 ↗
58. On the origin of a third spectral component of C1s XPS-spectra for nc-TiC/a-C nanocomposite thin films10.1016/j.surfcoat.2007.12.038 ↗
59. Growth and characterization of arc evaporated TiSiC-Ni coatings10.1007/s11249-015-0521-6 ↗
60. Structure and characteristics of amorphous (Ti,Si)-C:H films deposited by reactive magnetron sputtering10.1016/j.diamond.2010.05.005 ↗
61. Structural, electrical, and mechanical properties of nc-TiC∕a-SiC nanocomposite thin films
62. Chemical structure and mechanical properties of Si-containing a-C:H and a-C thin films and their Cr- and W-containing derivatives10.1016/j.surfcoat.2011.05.041 ↗
63. Formation and reactivity of nitrides I. review and introduction10.1002/jctb.5010180301 ↗
64. Recent trends in surface engineering using cathodic arc technique10.1016/S0257-8972(02)00198-6 ↗
65. Reactive-sputter-deposited TiN films on glass substrates10.1016/0040-6090(91)90225-M ↗
66. Tribological behaviours of PVD TiN and TiCN coatings in artificial seawater10.1016/j.surfcoat.2013.03.034 ↗
67. Influence of the annealing treatment on the structure, morphology, and corrosion resistance of sputtered Zr-Ti-Si-O coatings used for biomedical applications10.1002/maco.201609200 ↗
68. Deposition and characterization of multi-principal-element (CuSiTiYZr)C coatings10.1016/j.apsusc.2013.07.152 ↗
69. A comparative study of the structural, mechanical and tribological characteristics of TiSiC-Cr coatings prepared in CH4 and C2H2 reactive atmosphere by cathodic vacuum arc10.1016/j.apsusc.2016.12.160 ↗
70. Synthesis and mechanical properties of TiAlC x N 1− x coatings deposited by arc ion plating10.1016/j.surfcoat.2005.08.065 ↗
71. Microstructure evolution and age hardening in (Ti,Si)(C,N) thin films deposited by cathodic arc evaporation10.1016/j.tsf.2010.08.150 ↗
72. Relationships between hardness, Young's modulus and elastic recovery in hard nanocomposite coatings10.1016/S0257-8972(01)01714-5 ↗
73. Flexible Ti-Ni-N thin films prepared by magnetron sputtering
74. Hard nanocomposite coatings: thermal stability, oxidation resistance and toughness10.1016/j.surfcoat.2012.05.073 ↗
75. On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour10.1016/S0043-1648(00)00488-9 ↗
76. Design criteria for wear-resistant nanostructured and glassy-metal coatings10.1016/j.surfcoat.2003.09.011 ↗
77. Toughness of hard nanostructured ceramic thin films10.1016/j.surfcoat.2006.07.020 ↗
78. Material related aspects of nanostructured tribological coatings
79. Advanced TiC/a-C:H nanocomposite coatings deposited by magnetron sputtering10.1016/j.jeurceramsoc.2005.06.023 ↗
80. Two-phase single layer Al-O-N nanocomposite films with enhanced resistance to cracking10.1016/j.surfcoat.2012.04.028 ↗
81. Design, fabrication and characterization of TiO 2 -SiO 2 multilayer with tailored color glazing for thermal solar collectors10.1016/j.matdes.2017.05.063 ↗
82. Transparent Zr-Al-O oxide coatings with enhanced resistance to cracking10.1016/j.surfcoat.2011.09.035 ↗
83. Properties of nanocrystalline Al-cu-O films reactively sputtered by DC pulse dual magnetron10.1016/j.apsusc.2011.10.039 ↗
84. Magnetron sputtering of hard nanocomposite coatings and their properties10.1016/S0257-8972(01)01139-2 ↗
85. Tribological and mechanical properties of nanocrystalline-TiC/a-C nanocomposite thin films10.1116/1.3294717 ↗
86. Ambient and elevated temperature properties of TiN, TiAlN and TiSiN PVD films and their impact on the cutting performance of coated carbide tools10.1016/j.surfcoat.2009.07.001 ↗
87. A new method for Analyzing data from continuous depth-sensing microindentation tests10.1557/JMR.1990.0123 ↗
88. Thin films and coatings: Toughening and toughness characterization10.1201/b18729-3 ↗
89. Acid corrosion process of Fe-based bulk metallic glass10.1016/j.corsci.2012.05.004 ↗
90. Impedance study on the corrosion of PVD and CVD titanium nitride coatings
91. One- and two-dimensional polymer films ofmodified alkanethiol monolayers for preventing iron fromcorrosion10.1016/S0010-938X(98)00048-1 ↗
92. Microstructure and tribological behavior of amorphous and crystalline composite coatings using laser melting10.1016/j.apsusc.2012.03.130 ↗
93. The tribological characteristics of TiCN coating at elevated temperatures10.1016/j.wear.2004.12.031 ↗
94. Annealing studies of nanocomposite Ti-Si-C thin films with respect to phase stability and tribological performance10.1016/j.msea.2006.05.053 ↗
95. Effects of substrate temperature and carbon content on the structure and properties of (CrCuNbTiY)C multicomponent coatings10.1016/j.surfcoat.2014.07.044 ↗
96. Sputter deposition of transition-metal carbide films - a critical review from a chemical perspective10.1016/j.tsf.2013.02.019 ↗
97. Solid solution or amorphous phase formation in TiZr-based ternary to quinternary multi-principal-element films10.1016/j.pnsc.2014.06.001 ↗
98. Solid-solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗