journal article·2015-10Open access

Cu(In,Ga)(Se,Te)2 pentenary thin films formed by reaction of precursor layers

Y. Atasoy, B.M. Başol, İ. Polat, M. Tomakin, M. Parlak, E. Bacaksız

Thin Solid Films· Volume 592

Abstract

Abstract Sodium doped CuIn(1 − x)Gax(Se(1 − y)Tey)2 (CIGST) thin films were grown on Mo-coated soda lime glass substrates by a two-stage technique. The effects of Te content and annealing temperature on the microstructural characteristics and phase segregation in CIGST thin films were studied. It was observed that presence of Ga in these films affected the kinetics of the reaction and phase formation and largely eliminated the separation of the Te-rich phase towards the Mo surface, which was previously observed under the two-stage processing conditions in films containing only Cu, In, Se and Te. Microprobe measurements showed that the smaller grain material visible through the gaps within the larger grain material had higher Ga and Se content compared to larger grains, which were richer in Te and In. For CIGS film formation, an annealing regime that involved a low temperature partial reaction step followed by a high temperature reaction step yielded better films compared to a process with a single high temperature step. However, for films containing both Se and Te, the two temperature processing approach caused excessive phase separation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%10.1002/pssr.201409520 ↗
2. 19.9%-efficient ZnO/CdS/CuInGaSe2 solar cell with 81.2% fill factor10.1002/pip.822 ↗
3. Cu(In,Ga)Se2 thin films and solar cells prepared by selenization of metallic precursors10.1116/1.580056 ↗
4. CIS-based thin-film PV technology in solar frontier K.K.10.1016/j.solmat.2013.09.014 ↗
5. Application of electrochemical deposition techniques to thin film solar cell processing10.1117/12.896362 ↗
6. Characterization of Cu–In–Se–Te system in thin films grown by thermal evaporation10.1116/1.578079 ↗
7. Structure of melt quenched chalcogen rich CuInSeTe10.1063/1.3606243 ↗
8. CuIn(Se1−xTex)2 solar cells with tunable narrow-bandgap for bottom cell application in multijunction photovoltaic devices10.1016/j.solmat.2013.05.054 ↗
9. Investigation of the chalcogen interdiffusion in CuIn(TeSe)2 thin films10.1016/S0927-0248(95)00158-1 ↗
10. Control of CIS film quality by substrate surface modifications in a two-stage process
11. The influence of stoichiometry and annealing temperature on the properties of CuIn0.7Ga0.3Se2 and CuIn0.7Ga0.3Te2 thin films10.1016/j.tsf.2013.07.032 ↗
12. Influence of substrates on the electrical properties of Cu(In,Ga)Se2 thin films
13. Spectroscopic investigation of the deeply buried Cu(In, Ga)(S, Se)2/Mo interface in thin-film solar cells10.1063/1.2168443 ↗
14. Structural and optical properties of CuInTe2 films prepared by thermal vacuum evaporation from a single source10.1016/S0927-0248(96)00084-0 ↗
15. X ray and D.T.A. studies of the CuIn(Se1−xTex)2 pseudo-binary system. Flash evaporation of CuIn(Se1−xTex)2 and CuIn1−yGaySe2