article·2006-05-07

SrTiO3–SiO2 oxide films for possible high-k gate dielectric applications

Chun-Chieh Lin, Li-Wen Lai, Chih‐Yang Lin, Tseung‐Yuen Tseng

Publisher page

Abstract

Abstract Amorphous thin films of SrTiO 3 –SiO 2 high- k dielectric oxides were deposited on p-Si substrate by sputtering from the targets made by SrTiO 3 and SiO 2 powder mixtures. The surface morphology, crystal structure, chemical bonding configuration, and depth profile of the composition were investigated by using scanning electron microscopy, glancing incident angle X-ray diffraction, X-ray photoelectron spectroscopy, and Auger electron spectroscopy, respectively. The capacitance–voltage ( CV ) and current–voltage characteristics were used for demonstrating their electrical properties. The SrTiO 3 –SiO 2 thin films remained as amorphous structures when annealed up to 900 °C. The Pt/SrTiO 3 –SiO 2 /Si MOS structure had a low leakage current density of ∼ 2 × 10 − 8 A/cm 2 measured at 100 kV/cm and dielectric constant of 24 for 700 °C-annealed film. The films annealed at 600 °C showed typical CV characteristics. However, the deformed CV curves were found for films annealed at 700 °C due to the diffusion of Ti species in the SrTiO 3 –SiO 2 film into the Si substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Electronic and Structural Properties of Oxides · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.