article·2010-07-16

Structure and mechanical properties of low temperature magnetron sputtered nanocrystalline (nc-)Ti(N,C)/amorphous diamond like carbon (a-C:H) coatings

C. Tsotsos, Mark Baker, Kyriaki Polychronopoulou, P.N. Gibson, Κωνσταντίνος Γιαννακόπουλος, Andreas A. Polycarpou, K. Böbel, Claus Rebholz

Publisher page

Abstract

This paper reports on the structure and mechanical properties of ~ 2 μm thick nanocomposite (nc-) Ti(N,C)/amorphous diamond like carbon (a-C:H) coatings deposited on 100Cr6 steel substrates, using low temperature (~ 200 °C) DC reactive magnetron sputtering. The carbon content was varied with acetylene partial pressure in order to obtain single layer coatings with different a-C:H carbon phase fractions. The nanocrystalline Ti(N,C) phase is approximately stoichiometric for all coatings and the a-C:H phase fraction increases from 31 to 47 at.% as the coatings stoichiometry changed from TiC1.34 N0.51 to TiC2.48 N0.48, respectively. TiC1.34 N0.51 coatings showed the highest nanoindentation hardness (H) of ~ 14 GPa and a modulus (Er) of ~ 144 GPa; H reduced to < 6 GPa and Er to < 70 GPa for TiC2.48 N0.48 coatings. nc-Ti(N,C)/a-C:H coatings are promising candidates for applications where better matching of the modulus between a relatively low modulus substrate, hard loading support layer and low modulus-high H/E ratio top layer is required.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.