article·2005-06-01

Study of the plasma etching process for low-loss SiO2/Si optical waveguides

Libing Zhou, Fengguang Luo, Mingcui Cao

Publisher page

Abstract

Abstract Deep etching of Ge-doped SiO 2 using an epoxy based negative resist and a Chromium film as a mask in CHF 3 /O 2 plasma has been investigated. Parameters varied in design that include radio-frequency (RF) power, gas ratio, work pressure and gas total flux, and the major etch responses including etch rate and selectivity are modeled. In the high etch rate and high selectivity reactive ion etching process, it was found that the bottom and sidewall surfaces were rough in the Cr mask etching because of physical sputtering of the Cr film by ion bombardment. In addition, a tapered facet on the etched sidewall of resist mask sample when the etching process goes on some extent that attributed to epoxy resist film degeneration induced by ion bombardment effects. A novel resist-on-Cr double-layer mask that can overcome the single-layer mask limitation is developed for enhancing the Ge-doped SiO 2 etching result and improving the epoxy resist mask utilization. Based on studies, low-loss SiO 2 /Si channel waveguides with propagation loss of − 0.07 dB/cm are fabricated at last.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Photonic and Optical Devices · Advanced Surface Polishing Techniques · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.