journal article·2018-08Open access

Transparent block copolymer thin films for protection of optical elements via chemical vapor deposition

Merve Özpirin, Özgenç Ebil

Thin Solid Films· Volume 660

Abstract

Abstract In this study, glycidyl methacrylate and 1H, 1H, 2H, 2H-perfluorodecyl acrylate copolymer p(GMA-co-PFDA) thin-films fabricated via Initiated Chemical Vapor Deposition (iCVD) were investigated as protective coatings on optical BK7 glass substrates and commercial optical filters. Durability tests based on military standards MIL-F-48616 and MIL-C-48497A were performed to evaluate performance of coatings for the protection of surfaces of optical elements. Cross-linked p(GMA-co-PFDA) copolymer coatings successfully passed all durability tests showing excellent mechanical properties and protection against humidity, salt water, swelling in water, and resistance to organic solvents while providing excellent adhesion to substrate. iCVD process enabled fine tuning of film morphology, mechanical properties and hydrophobicity by controlling the process parameters. Fabricated films were hydrophobic and highly transparent (>98%) in the wavelength range from 300 nm to 1000 nm. Optical transmittance measurements before and after coating process proved that while providing chemical and physical protection, p(GMA-co-PFDA) copolymer thin-films do not cause any detectable change in optical performance of commercial narrow band and wide band filters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicone and Siloxane Chemistry · Optical Coatings and Gratings · Synthesis and properties of polymers

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Gleason · 2015
2. Particle functionalization and encapsulation by initiated chemical vapor deposition (iCVD)10.1016/j.surfcoat.2007.04.045 ↗
3. Piegari · 2013
4. Silica-based hybrid coatings10.1039/b819615j ↗
5. Inorganic–organic hybrid coatings: common and new approaches10.1016/j.coche.2016.01.008 ↗
6. Functionalized coating materials based on inorganic-organic polymers10.1016/S0040-6090(99)00203-5 ↗
7. Preparation of scratch resistant superhydrophobic hybrid coatings bysol–gel process10.1016/j.porgcoat.2014.05.009 ↗
8. Transparent, superhydrophobic, and wear-resistant Coatings on glass and polymer substrates using SiO2, ZnO, and ITO nanoparticles10.1021/la301479c ↗
9. Development of a transparent scratch resistant coating through direct oxidation of Al-coated glass10.1002/adem.201600617 ↗
10. Wakaki · 2012
12. Chemical vapor deposition of conformal, functional, and responsive polymer films10.1002/adma.200902765 ↗
13. Polymeric barrier coatings via initiated chemical vapor deposition10.1016/j.surfcoat.2011.09.021 ↗
14. Pierson · 1999
15. Initiated chemical vapor deposition of polyvinylpyrrolidone-based thin films10.1016/j.polymer.2006.07.068 ↗
16. Particle functionalization and encapsulation by initiated chemical vapor deposition (iCVD)10.1016/j.surfcoat.2007.04.045 ↗
17. Smart surfaces by initiated chemical vapor deposition10.1680/si.12.00019 ↗
18. Super-Hydrophobic and Oloephobic Crystalline Coatings by Initiated Chemical Vapor Deposition10.1016/j.phpro.2013.07.045 ↗
19. Initiated chemical vapor deposition (iCVD) of poly (alkyl acrylates): An experimental study10.1021/ma0601619 ↗
20. Applying HWCVD to particle coatings and modeling the deposition mechanism10.1016/j.tsf.2007.06.045 ↗
21. Initiated chemical vapor deposition (iCVD) of polymeric nanocoatings10.1016/j.surfcoat.2007.05.003 ↗
22. Initiated chemical vapour deposition (iCVD) of thermally stable poly-glycidyl methacrylate10.1016/j.surfcoat.2007.03.058 ↗
23. Initiated Chemical Vapor Deposition (iCVD) of Conformal Polymeric Nanocoatings for the Surface Modification of High-Aspect-Ratio Pores10.1021/cm702810j ↗
24. Preparation of poly(Glycidyl methacrylate)–copper nanocomposite by in-situ suspension polymerization – A novel synthetic method10.1016/j.matlet.2014.06.127 ↗
25. Hot Filament Chemical Vapor Deposition of Poly(glycidyl methacrylate) Thin Films Using tert-Butyl Peroxide as an Initiator10.1021/la0359427 ↗
26. Large-scale initiated chemical vapor deposition of poly(glycidyl methacrylate) thin films10.1016/j.tsf.2006.05.021 ↗
27. Vapor-Deposited Fluorinated Glycidyl Copolymer Thin Films with Low Surface Energy and Improved Mechanical Properties10.1021/ma052591p ↗
28. Generation of functionalized polymer nanolayer on implant surface via initiated chemical vapor deposition (iCVD)10.1016/j.jcis.2014.10.018 ↗
29. Initiated Chemical Vapor Deposition of Poly(1H,1H,2H,2H-perfluorodecyl Acrylate) Thin Films10.1021/la061904m ↗
30. Enhanced Cross-Linked Density by Annealing on Fluorinated Polymers Synthesized via Initiated Chemical Vapor Deposition To Prevent Surface Reconstruction10.1021/ma4010633 ↗
31. A stacked polymer film for robust superhydrophobic fabrics10.1039/c2py20963b ↗
32. Wafer Scale Solventless Adhesive Bonding with iCVD Polyglycidylmethacrylate: Effects of Bonding Parameters on Adhesion Energies10.1002/admi.201500076 ↗
33. Surface modification of high aspect ratio structures with fluoropolymer coatings using chemical vapor deposition10.1016/j.tsf.2009.01.037 ↗