article·2014-07-24

Influence of oxygen and argon flow on properties of aluminum-doped zinc oxide thin films prepared by magnetron sputtering

Hua Zhu, Hemei Wang, Wenqiong Wan, Shijin Yu, Xiaowei Feng

Publisher page

Abstract

Abstract In this study, the influence of the oxygen/argon (O 2 /Ar) flow ratio on aluminum-doped zinc oxide (ZAO) films using a Zn 1.22 Al 0.02 O 1.25 target was investigated systematically. Different samples were obtained by changing the O 2 /Ar flow ratio from 0.11 to 3. The grain size first decreased and then increased as the O 2 /Ar flow ratio increased, reaching a minimum size of 8.53 nm at a flow ratio of 1. All films showed different average transmittances above 400 nm because of different surface structures and film thicknesses; the thickness of films varied from 261 to 897 nm. Moreover, the ZAO films exhibited different optical bandgaps between 3.22 eV and 3.31 eV. The resistivity first increased from 2.1 × 10 − 4 Ωcm to 350 × 10 − 4 Ωcm and then decreased to 220 × 10 − 4 Ωcm with increasing O 2 /Ar flow ratio. Both the carrier concentration and Hall mobility first decreased from 5.6 × 10 20 cm − 3 to 0.3 × 10 20 cm − 3 and from 3.9 cm 2 /Vs to 0.6 cm 2 /Vs, respectively, and then increased to 0.9 × 10 20 cm − 3 and 1.1 cm 2 /Vs, respectively, with increasing O 2 /Ar flow ratio.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.