article·2019-07-29

Low thermal budget annealing for thermochromic VO2 thin films prepared by high power impulse magnetron sputtering

Pi-Chun Juan, Kuei-Chih Lin, Cheng‐Li Lin, Chen-An Tsai, Yongchang Chen

Publisher page

Abstract

Abstract Thermochomic VO2 thin films are fabricated by using high power impulse magnetron sputtering at room temperature. In order to increase the crystallinity and transparency of VO2 thin films, first a buffer layer of TiO2 is deposited on the glass substrate. Then TiO2/VO2 stacks are post-annealed at a temperature of 500 °C for 3 min. The transmittance as functions of film thickness and O2/Ar ratio during film deposition is discussed. It is found that the O/V atomic ratio decreases with increasing O2/Ar ratio, which is due to serious inter-diffusion inside stacked layers. At high O2/Ar ratio, columnar-shaped crystals are suggested, which belongs to V2Ti3O9:Si quaternary oxide. The depth profiles of binding energies measured by X-ray photoelectron spectroscopy are compared with different O2/Ar ratios. Good endurance property for a thermal stress cycle of 25 °C/85 °C is obtained under the O2/Ar ratio of 6%. The laminated film shows satisfactory optical properties with an excellent solar regulation efficiency (ΔTsol = 10.4%) and an applicable luminous transmittance (Tlum = 35.2%) in a low-temperature state.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · Ga2O3 and related materials · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.