article·2019-08-03

Oxidation-induced healing in laser-processed thermal barrier coatings

Jiahui Gu, Sameehan S. Joshi, Yee‐Hsien Ho, Bowen Wei, Taihong Huang, Jane Lee, Diana Berman, Narendra B. Dahotre, Samir Aouadi

Publisher page

Abstract

Abstract The use of columnar structures in thermal barrier coatings (TBCs) enables producing materials with lower thermal conductivities that are also able to accommodate thermal expansion during temperature cycling events. However, open porosity leads to the failure of TBCs because of the rapid oxidation of the coating-substrate interface. Here we propose to create an oxidation-induced sealing process to mitigate any oxidation or potential chemical attack. This is achieved by pre-mixing the top surface with a carbide phase (TiC or SiC) that oxidizes in contact with air to seal the surface through volume expansion. Laser processing was used as a technique to fabricate YSZ-Al2O3-TiC or YSZ-Al2O3-SiC layers on 316 stainless steel substrates to understand the viability of this process as well as this coating design in creating self-healing thermal barrier coatings. Nanocomposite self-healing coatings and single-phase yttria-stabilized zirconia (YSZ) reference layers were produced using a laser fluence of 17.0 J/mm2 (800 W), 19.1 J/mm2 (900 W), and 25.5 J/mm2 (1200 W) to optimize process conditions. These coatings were subsequently annealed at 720 °C for 12 h to ensure complete oxidation of the TiC(SiC) phase in the former coating. X-ray diffraction and cross-sectional energy dispersive x-ray spectroscopy (EDS) elemental mapping confirmed the creation of the desired columnar structure to accommodate thermal stresses and that a post-annealing treatment was required to achieve complete oxidation of the TiC(SiC) phase. The migration of TiO2 phase to the crack site was demonstrated using cross-sectional scanning electron microscopy (SEM) in tandem with elemental mapping via energy dispersive spectroscopy. The suggested optimum laser fluence to create a viable self-healing composite was found to be 17.0 J/mm2 since higher values resulted in significant interdiffusion between the substrate and the coating as indicated by cross-sectional SEM/EDS. Laser processing was demonstrated to be a viable technique that has the potential to create a self-healing layer that seals YSZ-based underlayers from diffusion.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.