Microstructure and thermoelectric properties of Bi 2 Te 3 electrodeposits plated in nitric and hydrochloric acid baths
Source abstract
Abstract
Abstract The reduction behaviors of unitary and binary bismuth cation (Bi III ), tellurium cation (Te IV ) in nitric acid and hydrochloric acid solutions were studied at different acid concentrations. Compared to the nitrate bath, the reduction of Bi III was retarded and the reduction of Te IV was promoted in hydrochloric acid. As a result, the difference in the reduction potential of Bi III and Te IV was markedly reduced in the presence of chloride ion. The acid concentration affected the morphologies of the Bi-Te deposit; specifically a rougher deposit was electroplated at higher acid concentrations. A 25 μm Bi 2 Te 3 film obtained from 0.7 M HNO 3 at − 20 mV versus saturated calomel electrode (SCE) had columnar structure with (110) preferred orientation and its Seebeck coefficient and power factor were − 72.3 μV/K and 732 μW/m·K 2 , respectively. A 25 μm smooth, compact, nano-grained Bi 2 Te 3 film was fabricated in 0.35 M HCl at − 20 mV versus SCE and its Seebeck coefficient and power factor were − 105.0 μV/K and 169 μW/m·K 2 , respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Thermal Radiation and Cooling Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.