journal article·2016-07

High temperature annealing effects on the chemical and mechanical properties of inductively-coupled plasma-enhanced chemical vapor deposited a-SiC:H thin films

Tobias Frischmuth, Michael Schneider, Daniel Maurer, Thomas Grille, Ulrich Schmid

Thin Solid Films· Volume 611
Publisher page

Abstract

Abstract This paper reports the impact of thermal annealing up to temperatures of 1200 °C on the chemical and mechanical properties of hydrogenated amorphous silicon carbide (a-SiC:H) thin films. These layers were deposited using an inductively-coupled plasma-enhanced chemical vapor deposition process with methane, silane and argon as precursor gases. The results of mass effusion measurements up to 1000 °C are presented and the temperature-dependent effusion characteristics are compared to changes in the Fourier-transform infrared spectra. Furthermore, a simple method is presented that enables us to detect the onset of nanocrystallization in the a-SiC:H films caused by the high temperature annealing. The changes in chemical and crystallographic properties are discussed and related to the mechanical thin film properties, such as a substantial increase in Young's modulus from 176 up to 267 GPa, in hardness from 24 up to 34.5 GPa, as well as in residual film stress from − 683 up to + 3800 MPa. Additionally, the decrease in layer thickness to about 70% of the initial value and the increase in refractive index from 2.33 to 2.78 are explained.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Diamond and Carbon-based Materials Research · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. SiC MEMS: opportunities and challenges for applications in harsh environments10.1016/S0257-8972(99)00374-6 ↗
2. Silicon carbide as a new MEMS technology10.1016/S0924-4247(99)00335-0 ↗
3. Enhanced stability of Ti/Pt micro-heaters using a-SiC:H passivation layers10.1016/j.sna.2005.12.038 ↗
4. Silicon carbide for microelectromechanical systems10.1179/095066000101528322 ↗
5. Material science and device physics in SiC technology for high-voltage power devices10.7567/JJAP.54.040103 ↗
6. SiC devices for advanced power and high-temperature applications10.1109/41.915409 ↗
7. High reliability of MEMS packaged capacitive pressure sensor employing 3C–SiC for high temperature10.1016/j.egypro.2015.03.279 ↗
8. Fabrication of micro heaters on polycrystalline 3C–SiC suspended membranes for gas sensors and their characteristics10.1016/j.mee.2010.04.005 ↗
9. Low-temperature processes for MEMS device fabrication
10. Effect of substrate temperature on (micro/nano)structure of a-SiC:H thin films deposited by radio-frequency magnetron sputtering10.1021/jp3079937 ↗
11. An investigation on the effect of high partial pressure of hydrogen on the nanocrystalline structure of silicon carbide thin films prepared by radio-frequency magnetron sputtering10.1016/j.saa.2014.10.029 ↗
12. Perraud · 2013 · 210 · 649
13. Silicon nanocrystals produced by solid phase crystallisation of superlattices for photovoltaic applications10.1016/j.mseb.2012.10.018 ↗
14. Etching characteristics and mechanical properties of a-SiC:H thin films10.1016/S0924-4247(01)00691-4 ↗
15. Annealing effects on a-SiC:H and a-SiC:H(F) thin films deposited by PECVD at room temperature10.1016/S0040-6090(94)06473-3 ↗
16. Annealing effects of highly homogeneous a-Si1−xCx:H10.1016/S0022-3093(03)00526-X ↗
17. Thermal annealing of SiC thin films with varying stoichiometry10.1016/j.mseb.2008.10.056 ↗
18. Amorphous SixC1−x:H single layers before and after thermal annealing: correlating optical and structural properties10.1016/j.solmat.2010.06.014 ↗
19. Low temperature deposition of nanocrystalline silicon carbide films by plasma enhanced chemical vapor deposition and their structural and optical characterization10.1063/1.1609631 ↗
20. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
21. Fourier transform infrared spectroscopy investigation of chemical bonding in low-k a-SiC:H thin films10.1016/j.jnoncrysol.2011.04.001 ↗
22. Structural interpretation of the vibrational spectra of a-Si: H alloys10.1103/PhysRevB.19.2064 ↗
23. FTIR analysis of a-SiC:H films grown by plasma enhanced CVD10.1016/j.jcrysgro.2004.11.128 ↗
24. Hydrogen effusion from highly-ordered near-stoichiometric a-SiC:H10.1016/j.jnoncrysol.2004.02.024 ↗
25. XPS and XRD study of crystalline 3C–SiC grown by sublimation method10.1016/S0925-8388(98)00994-3 ↗
26. A profile refinement method for nuclear and magnetic structures10.1107/S0021889869006558 ↗
27. The HighScore suite10.1017/S0885715614000840 ↗
28. Novel silicon nanocrystal materials for photovoltaic applications
29. Hydrogen kinetics in a-Si:H and a-SiC:H thin films investigated by real-time ERD10.1016/j.nimb.2015.02.040 ↗
30. Dean · 2005
31. Effect of reactive gas flow ratio on IC-PECVD deposited a-SiC:H thin films10.1016/j.proeng.2014.11.543 ↗
32. Refractive index, dispersion, and birefringence of silicon carbide polytypes10.1364/AO.10.001034 ↗
33. Impact of thermal treatment on the residual stress and Young's modulus of thin a-SiC:H membranes applying bulge testing10.1016/j.proeng.2015.08.797 ↗
34. Residual stress effect on hardness and yield strength of Ni thin film10.1016/j.surfcoat.2012.07.002 ↗
35. 3C–SiC films on Si for MEMS applications: mechanical properties10.4028/www.scientific.net/MSF.615-617.633 ↗