article·2011-03-07

Effect of photoelectrode morphology of single-crystalline anatase nanorods on the performance of dye-sensitized solar cells

Chun-Hou Liao, Wu-Tsung Shih, Chi-Chang Chen, Yuh‐Lang Lee, Ping-Lin Kuo

Publisher page

Abstract

Abstract TiO 2 terpineol-based pastes with nanorods (NRs) of over 25 μm thickness have been prepared for the photoactive electrodes of the dye-sensitized solar cells (DSSCs). The NRs, with a length of approximately 80 nm and an aspect ratio of about 3, are made by a two-step hydrothermal process. They have the single crystalline anatase structure and can be dispersed well in water and ethanol. With a high thermal stability and larger surface area (47.2 m 2 g − 1 ) than commercial TiO 2 particles (P25, 39.1 m 2 g − 1 ), the well-dispersed anatase NR films with aggregate-free morphology are transparent. For the photocurrent–voltage measurements, the NR cell exhibits high short-circuit photocurrent (J SC ) under 1 Sun AM 1.5 simulated sunlight due to the higher surface area and transmittance. The open-circuit voltage (V OC ) of NR films is not obviously reduced with incremental thickness, which results from the one-dimensional single crystalline structure of NR due to less surface defects. As compared with the P25 cell, DSSCs made with NRs have a higher fill factor (FF) because of the uniform void spaces. An enhancement of conversion efficiency from 4.88% for P25 to 5.67% for NR is achieved. The P25 particles are incorporated in NR films as light-scattering centers, while the R1P1 containing 50 wt.% of P25 has a high V OC and FF as compared with P25, but the J SC is still lower than that of the NR.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.