Microstructure and mechanical properties of W–Ni–N coatings prepared by magnetron sputtering
Source abstract
Abstract
Abstract W–Ni–N coatings were fabricated by direct current magnetron sputtering technique. The influence of Ni content on the microstructure, surface morphology and mechanical properties of coatings was investigated by using X-ray diffraction, scanning and transmission electron microscopy, X-ray photoelectron spectroscopy, atomic force microscopy, nanoindentation and scratch tests. The results showed that the addition of Ni into W–N coatings induced a change of grain morphology from polygon to granular shape leading to the reduction in contact area between the coating and the substrate. The roughness of coatings also decreased upon the addition of Ni. Therefore, the adhesion strength of W–Ni–N decreased from 60 to 38 N as Ni content is increased from 0 to 21 at.%. In contrast, the hardness increased slightly at first and then decreased with Ni concentrations. The maximum hardness of 38 GPa was obtained at 10.2 at.% Ni, corresponding to a composite structure consisting of nc-W2N + nc-Ni3N + nc-Ni.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Ohring · 2002
2. The structure and tribological behaviors of CrN and Cr–Ti–N coatings10.1016/j.apsusc.2007.02.061 ↗
3. Effect of Si content on the microstructure and mechanical properties of Mo–Al–Si–N coatings10.1016/j.vacuum.2012.05.009 ↗
4. Chemistry, physics and fracture mechanics in search for superhard materials, and the origin of superhardness in nc-TiN/a-Si3N4 and related nanocomposites10.1016/j.jpcs.2007.01.013 ↗
5. Synthesis and properties of nanocomposite MoSiN hard films10.1016/j.surfcoat.2005.12.046 ↗
6. Effect of carbon content on the microstructure and properties of W–Si–C–N coatings fabricated by magnetron sputtering10.1016/j.mseb.2012.05.021 ↗
7. Microstructure and cutting performance of Ti(C, N)-based cermets heat-treated in nitrogen10.1016/S1001-0521(07)60228-9 ↗
8. Stability of Ti–B–N solid solutions and the formation of nc-TiN/a-BN nanocomposites studied by combined ab initio and thermodynamic calculations10.1016/j.actamat.2008.04.066 ↗
9. Arc plasma deposition of TiSiN/Ni nanoscale multilayered coatings10.1016/j.matchemphys.2012.12.010 ↗
10. Size-effect on stress behavior of the AlN/TiN film10.1016/j.actamat.2009.02.018 ↗
11. Photothermal investigation of Ti–Cu–N and Ti–Ni–N PVD films10.1016/S0007-8506(07)60488-0 ↗
12. Hard and superhard Zr–Ni–N nanocomposite films10.1016/S0257-8972(01)00989-6 ↗
13. Toughening magnetron sputtered TiB2 coatings by Ni addition10.1016/j.surfcoat.2013.06.094 ↗
14. Synthesis and characterization of Ni and Ni/CrN nanocomposite coatings by plasma assisted metal–organic CVD10.1002/cvde.200506415 ↗
15. Amorphous Ni–N–W film as a diffusion barrier between aluminum and silicon10.1016/0040-6090(85)90356-6 ↗
16. Corrosion of sputtered W–Ni–N hard coatings in chloride media10.1016/S0040-6090(97)00294-0 ↗
17. Effect of Ni addition on the structure and properties of Cr–Ni–N coatings deposited by closed-field unbalanced magnetron sputtering ion plating10.1016/j.surfcoat.2012.12.032 ↗
18. Thermal stability of ZrN–Ni and CrN–Ni superhard nanocomposite coatings10.1016/S0257-8972(01)01477-3 ↗
19. Influence of Ni content on the structure and properties of Cr–Ni–N coatings prepared by direct current magnetron sputtering10.1016/j.tsf.2009.01.014 ↗
20. Structural properties of reactively sputtered W–Si–N thin films10.1063/1.2761828 ↗
21. Hahn · Z. Anorg. Allg. Chem. · 1951 · 264 · 18110.1002/zaac.19512640212 ↗
22. Ohring · 2002
23. Ion beam assisted deposition of TiN–Ni nanocomposite coatings10.1016/j.surfcoat.2011.03.102 ↗
24. Ni-toughened nc-TiN/a-SiNx nanocomposite thin films10.1016/j.surfcoat.2005.08.080 ↗
25. Structure of reactively sputtered nickel nitride films10.1016/0040-6090(83)90290-0 ↗
26. Structure and orientation of films prepared by reactive sputtering of Ni, Fe, and NiFe in Ar/N2 mixtures10.1063/1.347176 ↗
27. Formation process of Ni–N films by reactive sputtering at different substrate temperatures10.1016/S0042-207X(00)00339-0 ↗
28. Direct-liquid-injection chemical vapor deposition of nickel nitride films and their reduction to nickel films10.1021/cm903636j ↗
29. Tungsten nitride films grown via pulsed laser deposition studied in situ by electron spectroscopies10.1016/S0169-4332(03)00343-X ↗
30. Tungsten nitride thin films prepared by MOCVD10.1557/JMR.1993.1353 ↗
31. Electronic structure of Ti–Ni alloys: an XPS and NEXAFS study10.1016/j.jallcom.2012.05.059 ↗
32. Irradiation induced effects on Ni3N/Si bilayer system10.1016/j.vacuum.2009.06.003 ↗
33. Effect of annealing on microstructure, residual stress, and hardness of Al–Ti multilayered films10.1557/JMR.2001.0142 ↗
34. Deposition and characterization of fine-grained W–Ni–C/N ternary films10.1016/S0257-8972(99)00276-5 ↗