article·2011-09-29

Phase transitions of room temperature RF-sputtered ZnO/Mg0.4Zn0.6O multilayer thin films after thermal annealing

Jian‐Zhang Chen, Chih-Hung Li, I‐Chun Cheng

Publisher page

Abstract

Abstract We report the thermal stability of room-temperature RF-sputtered Mg 0.4 Zn 0.6 O thin films and ZnO/Mg 0.4 Zn 0.6 O superlattices at 600 °C and 800 °C. The phase of room-temperature as-sputtered Mg 0.4 Zn 0.6 O is crystalline ZnO embedded in an amorphous or short-range-ordered hexagonal MgZnO matrix. Annealing at either 600 °C or 800 °C for 5 min transforms the matrix into a crystalline hexagonal wurtzite structure, leading to a decrease of the optical bandgap ( E g ) of Mg 0.4 Zn 0.6 O. This also results in a slight change near the absorption edge of the superlattice transmission spectrum. The films precipitate cubic MgZnO after heating Mg 0.4 Zn 0.6 O at 800 °C for 5 min; by contrast, precipitations take at least 3 h if the samples are heated at 600 °C. Heating at 800 °C for more than 3 h significantly reduces the film thickness and E g , attributed to the decomposition of superlattices and diffusion of magnesium into the substrate, respectively. On the other hand, annealing the ZnO/Mg 0.4 Zn 0.6 O superlattice at 600 °C for 12 h also produces an initial slight change in the optical transmission spectra, yet the spectra remain essentially unchanged for the remainder of the annealing process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Ga2O3 and related materials · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.