The selective growth of rutile thin films using radio-frequency magnetron sputtering
Source abstract
Abstract
Abstract Using unbalanced radio-frequency (RF) magnetron sputtering crystalline rutile films were synthesised on glass substrates at (combined Ar and O 2 ) pressures of 0.4 Pa or less, at RF powers of 500 and 600 W with substrate to magnetron distances of 40 mm or longer. Anatase films were deposited at the greater pressure of 1.2 Pa (substrate to magnetron distance of 40 mm) or shorter substrate to magnetron distance of 20 mm (at 0.4 Pa). A mixture of anatase and rutile was formed at 0.5 Pa with all other conditions being as for those required for rutile or the power was reduced along with the substrate to magnetron distance (500 W and 20 mm). The crystallite sizes of rutile obtained were 1 – 3 nm. It is proposed that the greater the energy imparted to the substrate surface by the impinging positive species the greater the activation energy to crystalline phase formation that can be overcome. Hence the formation of rutile over anatase is favoured at greater power, longer magnetron to substrate distances and decreased pressure. Moreover, not only is it possible to control the phase of TiO 2 formed it appears to be possible to control the degree of oxygen non-stoichiometry in the rutile films formed. Smaller O 2 partial pressures, shorter substrate to magnetron distances and greater RF power are believed to produce an environment of reduced reaction of sputtered Ti species with O 2 and to result in the formation of non-stoichiometric rutile structures resulting in increased band gap energies and decreased refractive indices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.