journal article·2019-01

Effect of thermal treatment on structure, phase and mechanical properties of hydroxyapatite thin films grown by RF magnetron sputtering

J.A. Lenis, F.M. Hurtado, M.A. Gómez, F.J. Bolívar

Thin Solid Films· Volume 669
Publisher page

Abstract

Abstract Hydroxyapatite (HA) thin films with a Ca/P ratio of 1.69 and approximately 500 nm in thickness were deposited by radio frequency magnetron sputtering on Ti-6Al-4 V substrates at 100 °C and a working pressure of 0.5 Pa. The obtained coatings were thermally treated at 400 and 700 °C in argon atmosphere and characterized in terms of elemental and phase composition, morphology, structure and mechanical properties by energy dispersive x-ray spectroscopy, scanning electron microscopy, atomic force microscopy, micro-Raman spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction and nanoindentation. It was found that the thermal treatments increase the crystallinity although induce residual tensile stresses formation in the HA coatings, which are greater at high temperatures. Nevertheless, enhances in the mechanical properties: hardness (H), elastic modulus (E) and adhesion strength for the heat treated at 400 °C samples compared to the as-deposited coatings were obtained. Values of 7.45 ± 0.6 GPa (H), 115 ± 10 GPa (E) and a critical load of 175 ± 4 mN were measured for those thermally treated samples at 400 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Bone Tissue Engineering Materials · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. The corrosion and bioactivity behavior of SiC doped hydroxyapatite for dental applications10.1016/j.ceramint.2014.07.116 ↗
2. The Influence of argon gas pressure on co-sputtered calcium phosphate thin films
3. Strontium-substituted hydroxyapatite coatings deposited via a co-deposition sputter technique10.1016/j.msec.2014.10.046 ↗
4. Plasma sprayed coatings of hydroxylapatite10.1002/jbm.820211203 ↗
5. Antibacterial and biological characteristics of silver containing and strontium doped plasma sprayed hydroxyapatite coatings10.1016/j.actbio.2012.04.004 ↗
6. Physical properties and bioactivity of nanocrystalline hydroxyapatite synthesized by a co-precipitation route10.1016/j.ceramint.2012.10.129 ↗
7. Fabrication and physico-mechanical properties of thin magnetron sputter deposited silver-containing hydroxyapatite films10.1016/j.apsusc.2015.11.087 ↗
8. Substituted hydroxyapatites for biomedical applications: a review10.1016/j.ceramint.2015.03.316 ↗
9. Processing and characterization of hydroxyapatite coatings on titanium produced by magnetron sputtering10.1557/JMR.2001.0446 ↗
10. Characterization studies on plasma sprayed (AT/HA) bi-layered nano ceramics coating on biomedical commercially pure titanium dental implant10.1016/j.ceramint.2013.12.116 ↗
11. Surface characteristics of hydroxyapatite films deposited on anodized titanium by an electrochemical method10.1016/j.tsf.2013.04.077 ↗
12. Enhancement of the mechanical properties of hydroxyapatite by SiC addition10.1016/j.jmbbm.2014.08.025 ↗
13. Fabrication, ultra-structure characterization and in vitro studies of RF magnetron sputter deposited nano-hydroxyapatite thin films for biomedical applications10.1016/j.apsusc.2014.08.104 ↗
14. Ultrathin film coating of hydroxyapatite (HA) on a magnesium – calcium alloy using RF magnetron sputtering for bioimplant applications10.1016/j.matlet.2015.03.140 ↗
15. Fabrication of hydroxyapatite thin films for biomedical applications using RF magnetron sputtering10.1016/j.nimb.2006.03.126 ↗
16. The preparation of calcium phosphate coatings on titanium and nickel-titanium by rf-magnetron-sputtered deposition: composition, structure and micromechanical properties10.1016/j.surfcoat.2008.01.038 ↗
17. Osteoblast precursor cell attachment on heat-treated calcium phosphate coatings10.1177/154405910308200609 ↗
18. Influence of the substrate bias on the stoichiometry and structure of RF-magnetron sputter-deposited silver-containing calcium phosphate coatings10.1002/mawe.201300101 ↗
19. The influence of the deposition parameters on the properties of an rf-magnetron-deposited nanostructured calcium phosphate coating and a possible growth mechanism10.1016/j.surfcoat.2010.12.039 ↗
20. Phase composition of sputtered films from a hydroxyapatite target10.1016/S0257-8972(02)00363-8 ↗
21. Thermal and structural characterization of synthetic and natural nanocrystalline hydroxyapatite10.1016/j.msec.2014.07.023 ↗
22. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
23. Incorporation of silver nanoparticles into magnetron-sputtered calcium phosphate layers on titanium as an antibacterial coating10.1016/j.colsurfb.2017.05.016 ↗
24. Influence of deposition conditions on the composition, texture and microstructure of RF-magnetron sputter-deposited hydroxyapatite thin films10.1016/j.tsf.2015.03.058 ↗
25. The effect of patterned titanium substrates on the properties of silver-doped hydroxyapatite coatings10.1016/j.surfcoat.2015.06.010 ↗
26. Enhancement of the mechanical properties of AZ31 magnesium alloy via nanostructured hydroxyapatite thin films fabricated via radio-frequency magnetron sputtering10.1016/j.jmbbm.2015.02.025 ↗
27. Composition of bone and apatitic biomaterials as revealed by intravital Raman microspectroscopy10.1016/j.bone.2005.02.012 ↗
28. Effect of the deposition temperature on corrosion resistance and biocompatibility of the hydroxyapatite coatings10.1016/j.apsusc.2015.05.059 ↗
29. Contributions of Raman spectroscopy to the understanding of bone strength10.1038/bonekey.2014.115 ↗
30. RF magnetron-sputtered coatings deposited from biphasic calcium phosphate targets for biomedical implant applications
31. Differentiation between hydroxyapatite and β-tricalcium phosphate by means of μ-Raman spectroscopy10.1016/S0955-2219(98)00057-0 ↗
32. Titania/hydroxyapatite bi-layer coating on Ti metal by electrophoretic deposition: characterization and corrosion studies10.1016/j.ceramint.2011.12.026 ↗
33. Synthesis and characterization of hydroxyapatite crystals: a review study on the analytical methods
34. Studies of hydroxyapatite thin coating produced by dual rf magnetron sputtering for biomedical applications
35. Formation and characterization of crystalline hydroxyapatite coating with the (002) Texture10.1088/1757-899X/116/1/012016 ↗
36. The structure of an rf-magnetron sputter-deposited silicate-containinghydroxyapatite-based coating investigated by high-resolution techniques10.1016/j.surfcoat.2012.12.023 ↗
37. Effect of silicate doping on the structure and mechanical properties of thin nanostructured RF magnetron sputter-deposited hydroxyapatite films10.1016/j.surfcoat.2015.05.021 ↗
38. Microstructure and mechanical properties of hydroxyapatite thin films grown by RF magnetron sputtering10.1016/S0257-8972(03)00729-1 ↗
39. Crystalline nano-coatings of fluorine-substituted hydroxyapatite produced by magnetron sputtering with high plasma con fi nement10.1016/j.surfcoat.2014.12.055 ↗
40. Densification behaviour and mechanisms of synthetic hydroxyapatites10.1016/S0955-2219(00)00154-0 ↗
41. Effect of thermal treatment of the hydroxyapatite powders on the micropore and microstructure of porous biphasic calcium phosphate composite granules
42. Influence of titanium-substrate roughness on Ca – P – O thin fi lms grown by atomic layer deposition10.1016/j.tsf.2012.11.137 ↗
43. Hydroxyapatite-bond coat systems for improved mechanical and biological performance of hip implants
44. ASTM C1624–05 · 2015 · 05 · 1
45. Radio frequency magnetron sputtering HA/Ti coatings deposited using double-layered target: phase composition and film adherence of heat-treated coatings
46. Comparative study of the radio-frequency magnetron sputter deposited CaP films fabricated onto acid-etched or pulsed electron beam-treated titanium10.1016/j.tsf.2014.10.049 ↗
47. On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour10.1016/S0043-1648(00)00488-9 ↗