article·2015-05-13

HfO2/SiO2 multilayer enhanced aluminum alloy-based dual-wavelength high reflective optics

Angela Q. Wang, Jue Wang, Michael J. D'lallo, Jim E. Platten, Joseph C. Crifasi, Brian P. Roy

Publisher page

Abstract

Abstract Laser durable multiband high reflective optics can be attained by depositing HfO2/SiO2 stacks on diamond-turned and optically polished aluminum alloy substrates. HfO2 and SiO2 single layers were prepared using modified plasma-ion assisted deposition. Ellipsometric measurements were performed using two types of variable angle spectroscopic ellipsometry with a combined spectral range of 150 nm to 14 μm. Optical constants were generated in the entire spectral range. Scatter loss as a function of surface roughness was calculated at 1064 nm, 1572 nm, and 4.1 μm, representing a primary wavelength, a secondary wavelength, and a middle wave infrared band selected for a dual-wavelength laser beam expander, respectively. The surface requirement of the aluminum alloy substrates was determined. Calculated and measured spectral reflectances were compared. Laser-induced damage threshold tests were performed at 1064 nm, 20 ns, and 20 Hz. A laser-induced damage threshold of 47 J/cm2 was determined. Post-damage analysis suggests that nodule defects are the limiting factor for the laser-induced damage threshold. Surface modification of the aluminum alloy was identified as a potential technical solution that may further increase the laser damage resistance of the dielectric enhanced dual-wavelength reflective optics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Optical Coatings and Gratings · Surface Roughness and Optical Measurements

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.