journal article·2016-07Open access

Mechanical failure of brittle thin films on polymers during bending by two-point rotation

Qingling Guan, Jozua Laven, Piet C.P. Bouten, Gijsbertus de With

Thin Solid Films· Volume 611

Abstract

The mechanical failure and internal strain when bending a brittle thin film on a flexible substrate was analyzed using an electro-mechanical method and optical microscopy. Bending was realized by clamping the ends of the sample and rotating the clamps in a two-point rotation (2PR) device, as elaborated in the paper. This test allows to impose both tensile and compressive strains on the brittle layer, in a single test, without remounting the sample. With the electro-mechanical method the real-time electrical resistance is measured in a very thin, conductive coating deposited on the brittle layer in which cracks develop across the width of the film. Simultaneously, the propagation of individual cracks is observed by optical microscopy. Real-time combination of both analyses in principle enables linking the fracture behavior (size, number and pattern of cracks) with the electrical resistance at a well-defined imposed strain. With this 2PR method, the subcritical mechanical failure of a 150 nm thick SiNx barrier layer was analyzed, as deposited on a 125 μm thick polyethylene naphtalate sheet (system 1). Its characteristic static failure time, as obtained from a Weibull analysis, was 0.10 s at a strain of 0.84% and 2.2 s at 0.77%. From the crack opening on reloading tests, an average internal compressive strain of 0.38% was deduced. In order to validate the results of the 2PR device, system 1 was also tested using two-plate bending (2PB), as described earlier. Results on characteristic failure strains as obtained with both methods for bending match very well and have similar accuracy. However, the option to assess tensile internal strains, together with the aforementioned advantages, renders the 2PR test the method of choice for testing brittle layers on polymer substrates. Comparison of system 1 with another barrier system (2), which only differs in processing conditions, indicates a considerable difference in time dependence of the characteristic failure strain, indicating the sensitivity of the resulting material properties on processing conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Force Microscopy Techniques and Applications · Advanced Surface Polishing Techniques · Advanced MEMS and NEMS Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Plasma deposition of optical films and coatings: a review10.1116/1.1314395 ↗
2. Crawford · 2005
3. Flexible solar cells10.1002/cssc.200800127 ↗
4. Mechanical integrity of thin inorganic coatings on polymer substrates under quasi-static, thermal and fatigue loadings10.1016/j.tsf.2010.06.003 ↗
5. Estimation of interfacial fracture toughness based on progressive edge delamination of a thin transparent coating on a polymer substrate10.1016/j.actamat.2010.01.023 ↗
6. Investigation of brittle failure in transparent conductive oxide and permeation barrier oxide multilayers on flexible polymers10.1016/j.tsf.2009.08.057 ↗
7. Electro-fragmentation analysis of dielectric thin films on flexible polymer substrates10.1016/j.tsf.2008.10.074 ↗
8. A method to evaluate mechanical performance of thin transparent films for flexible displays10.1016/j.tsf.2006.11.034 ↗
9. Mechanical integrity of transparent conductive oxide films for flexible polymer-based displays10.1016/j.tsf.2004.01.052 ↗
10. Durability of nanosized oxygen-barrier coatings on polymers - internal stresses10.1016/S0079-6425(02)00002-6 ↗
11. Mechanical analysis of ultrathin oxide coatings on polymer substrates in-situ in a scanning electron microscope10.1016/S0040-6090(03)00613-8 ↗
12. Strain-dependent electrical resistance of tin-doped indium oxide on polymer substrates10.1063/1.126052 ↗
13. Mechanics of rollable and foldable film-on-foil electronics10.1063/1.123478 ↗
14. Direct measurement of intrinsic critical strain and internal strain in barrier films10.1063/1.3624582 ↗
15. Buckle initiation and delamination of patterned ITO layers on a polymer substrate10.1016/j.surfcoat.2010.11.025 ↗
16. Subcritical crack growth in SiNx thin-film barriers studied by electro-mechanical two-point bending10.1063/1.4809542 ↗
17. A new technique to measure through film thickness fracture toughness10.1016/S0040-6090(01)01613-3 ↗
18. Toughness measurement of thin films: a critical review10.1016/j.surfcoat.2004.10.021 ↗
19. Flexible film systems: current understanding and future prospects
20. Scanning X-ray microdiffraction with submicrometer white beam for strain/stress and orientation mapping in thin films10.1107/S0909049502021362 ↗
21. Residual stress measurement in textured thin film by grazing-incidence X-ray diffraction10.1016/S0040-6090(02)00680-6 ↗
22. Stress evolution in CrN/Cr coating systems during thermal straining10.1016/j.tsf.2007.10.106 ↗
23. Size-independent stresses in Al thin films thermally strained down to −100°C10.1016/j.actamat.2006.10.052 ↗
24. Size effects on yield strength and strain hardening for ultra-thin Cu films with and without passivation: a study by synchrotron and bulge test techniques10.1016/j.actamat.2008.01.027 ↗
25. The relationship between thin film fragmentation and buckle formation: synchrotron-based in situ studies and two-dimensional stress analysis10.1016/j.actamat.2008.11.023 ↗
26. Yield surface of polycrystalline thin films as revealed by non-equibiaxial loadings at small deformation10.1016/j.actamat.2013.04.031 ↗
27. The effect of temperature and strain rate on the periodic cracking of amorphous AlxOy films on Cu10.1016/j.surfcoat.2011.08.011 ↗
28. The effect of film thickness variations in periodic cracking: analysis and experiments10.1016/j.surfcoat.2011.07.047 ↗
29. Fracture toughness measurement of ultra-thin hard films deposited on a polymer interlayer10.1016/j.tsf.2013.10.052 ↗
30. In situ study of cracking and buckling of chromium films on PET substrates10.1007/s11340-010-9359-x ↗
31. Fragmentation testing for ductile thin films on polymer substrates10.1080/09500839.2013.830792 ↗
32. Buckle morphology of compressed inorganic thin layers on a polymer substrate10.1016/j.tsf.2005.11.106 ↗
33. Liquid nitrogen strengths of coated optical glass fibres10.1007/BF00552090 ↗
34. Strength measurement of optical fibers by bending10.1111/j.1151-2916.1986.tb07366.x ↗
35. Combined synchrotron X-ray and image-correlation analyses of biaxially deformed W/Cu nanocomposite thin films on Kapton10.1107/S0021889811030226 ↗
36. Guan · 2015
37. Guan · 2016
38. Noise sensitivity of fit procedures for Weibull parameter extraction10.1111/j.1151-2916.1991.tb08298.x ↗
39. Laven · 2016