journal article·2020-06

Influence of Sulfurization Time on the Properties of Cu2ZnSnS4 Thin Films Deposited on Mo-coated Soda Lime Glass Substrates by Co-sputtering Technique

N. Akcay, T. Ataser, Y. Ozen, S. Ozcelik

Thin Solid Films· Volume 704
Publisher page

Abstract

Abstract In this work, Cu2ZnSnS4 (CZTS) absorber films were prepared by sulfurization of co-sputtered precursor films at different time periods. The influence of sulfurization time on physical characteristics of the grown films was investigated in detail. The sulfurized CZTS films exhibited the characteristic diffraction peak of the kesterite phase corresponding to the (112) crystal plane, the main Raman mode of kesterite phase at around 337 cm−1 and Cu-deficient and Zn-rich composition. From the atomic force microscopy surface and cross-sectional scanning electron microscopy images, it was revealed out that the films were uniform, compact without any cracks and consisted of micron-sized and closely packed grains. In addition, the films showed tail-to-tail, band-to-tail and band-to-band transitions at around 1.41 eV (E1), 1.45 eV (E2) and 1.51 eV (E3), respectively. Secondary ion mass spectroscopy analysis showed that the sodium ions deeply diffused through the molybdenum layer into the CZTS film from the soda lime glass substrate for all samples. All of the films exhibited an optical band gap of around 1.4 eV, an absorption coefficient over 104 cm−1, p-type conductivity with a high concentration of free holes in the order of 1017-1018 cm−3 and low mobility in the range from 0.63 cm²/V.s to 8.11 cm²/V.s.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. The path towards a high-performance solution-processed kesterite solar cell10.1016/j.solmat.2010.11.028 ↗
2. Development of thin film solar cell based on Cu2ZnSnS4 thin films10.1016/S0927-0248(00)00088-X ↗
3. Thin Film Solar Cells: Research in an Industrial Perspective10.1007/s13280-012-0265-6 ↗
4. Detailed Balance Limit of Efficiency of p-n Junction Solar Cells10.1063/1.1736034 ↗
5. Device Characteristics of CZTSSe Thin-Film Solar Cells with 12.6% Efficiency10.1002/aenm.201301465 ↗
6. Cu2ZnSnS4 thin film solar cells10.1016/j.tsf.2004.11.024 ↗
7. The role of pre-annealing in the sulfurization of Cu-Zn-Sn stacked metal layer prepared by magnetron sputtering10.1016/j.mssp.2018.04.027 ↗
8. Epitaxial growth of kesterite Cu2ZnSnS4 on a Si(001) substrate by thermal co-evaporation10.1016/j.tsf.2013.12.046 ↗
9. Composition-ratio control of CZTS films deposited by PLD10.1002/pssc.201600212 ↗
10. High-Efficiency Solar Cell with Earth-Abundant Liquid-Processed Absorber10.1002/adma.200904155 ↗
11. Cu2ZnSnS4 films deposited by a co-electrodeposition-annealing route10.1016/j.matlet.2012.02.120 ↗
12. Synthesis of simple, low cost and benign sol-gel Cu2ZnSnS4 thin films: influence of different annealing atmospheres10.1007/s10854-014-2627-2 ↗
13. Optimization of sol-gel spin-coated Cu2ZnSnS4 (CZTS) thin-film control parameters by RSM method to enhance the solar cell performance10.1007/s10853-018-2464-4 ↗
14. CZTS layers formed under sulfur-limited conditions at above atmospheric pressure10.1016/j.mssp.2018.10.015 ↗
15. Effect of temperature on thermal expansion and anharmonicity in Cu2ZnSnS4 thin films grown by co-sputtering and sulfurization10.1016/j.matchemphys.2014.03.052 ↗
16. Effects of different precursors on Cu2ZnSnS4 thin film solar cells prepared by sputtering method10.1016/j.mssp.2016.08.012 ↗
17. Searching for a fabrication route of efficient Cu2ZnSnS4 solar cells by post-sulfuration of co-sputtered Sn-enriched precursors10.1039/C5TC02486B ↗
18. Sulfurization time effects on the growth of Cu2ZnSnS4 thin films by solution method10.1007/s10854-013-1153-y ↗
19. Dependence on Annealing Temperature of Properties of Cu2ZnSnS4 Thin Films Prepared by Sol-Gel Sulfurization Method10.1143/JJAP.50.01BE10 ↗
20. A Detrimental Reaction at the Molybdenum Back Contact in Cu2ZnSn(S,Se)(4) Thin-Film Solar Cells10.1021/ja308862n ↗
21. A two step technique to remove the secondary phases grown by sol - gel method10.1016/j.ceramint.2019.02.165 ↗
22. On the Sn loss from thin films of the material system Cu-Zn-Sn-S in high vacuum10.1063/1.3273495 ↗
23. Structural, morphological and optical studies of CdSe thin films from ammonia bath
24. Reconstructing the energy band electronic structure of pulsed laser deposited CZTS thin films intended for solar cell absorber applications10.1016/j.apsusc.2016.11.210 ↗
25. Structural Polymorphism in "Kesterite" Cu2ZnSnS4: Raman Spectroscopy and First-Principles Calculations Analysis10.1021/acs.inorgchem.6b03008 ↗
26. Fabrication of CZTS thin films by dip coating technique for solar cell applications10.1016/j.materresbull.2016.10.033 ↗
27. Obtaining phase-pure CZTS thin films by annealing vacuum evaporated CuS/SnS/ZnS stack10.1016/j.jcrysgro.2016.03.039 ↗
28. Calculation of the lattice dynamics and Raman spectra of copper zinc tin chalcogenides and comparison to experiments
29. The study of annealing process for CZTSSe under extra chalcogen vapor pressure
30. Influence of solvent on the properties of CZTS nanoparticles
31. CuSnS (x=2, 3) thin films grown by sulfurization of metallic precursors deposited by dc magnetron sputtering10.1002/pssc.200982746 ↗
32. Growth and Properties of Sprayed CZTS Thin Films10.1007/s11664-018-6433-0 ↗
33. Preparation of Cu2ZnSnS4 thin films by sulfurizing sol-gel deposited precursors10.1016/j.solmat.2007.04.012 ↗
34. Preparation and properties of SnS film grown by two-stage process10.1016/j.apsusc.2010.12.143 ↗
35. The role of structural properties on deep defect states in Cu2ZnSnS4 studied by photoluminescence spectroscopy10.1063/1.4750249 ↗
36. Study of surface sulfurization of Cu2ZnSn(S, Se)(4) thin film solar cell by sequential H2Se-selenization/H2S-sulfurization10.1016/j.solmat.2017.01.012 ↗
37. Microphotoluminescence study of Cu2ZnSnS4 polycrystals10.1117/1.JPE.3.030599 ↗
38. Strategies to Reduce the Open-Circuit Voltage Deficit in Cu2ZnSn(S,Se)(4) Thin Film Solar Cells10.1007/s13391-017-7118-1 ↗
39. Towards low-cost, environmentally friendly printed chalcopyrite and kesterite solar cells10.1039/C3EE43865A ↗
40. Influence of precursor type on non-toxic hybrid inks for high-efficiency Cu2ZnSnS4 thin-film solar cells10.1039/C4GC00896K ↗
41. Deposition of Cu2ZnSnS4 thin films by vacuum thermal evaporation from single quaternary compound source10.1016/j.matlet.2012.01.018 ↗
42. An alternative route towards low-cost Cu2ZnSnS4 thin film solar cells10.1016/j.surfcoat.2013.04.052 ↗
43. Influence of surface roughness on the electrical conductivity of semiconducting thin films10.1016/j.physa.2013.03.007 ↗