Impact of negative oxygen ions on the deposition processes of RF-magnetron sputtered SrTiO3 thin films
Source abstract
Abstract
Abstract This work reports on the deposition of strontium titanate (SrTiO3) thin films by on-axisradio-frequency magnetron sputtering. The on-axis sputter deposited SrTiO3 thin film showed drastic substrate etching due to the production of accelerated energetic negative oxygen ions, when applied power density on target is above a threshold value. The negative ion bombardment leads to the formation of surface micro-effects on the as-deposited SrTiO3 film or even complete removal of the substrate metallization. In order to understand the impact of negative ion bombardment and to limit these re-sputtering effects, the chemical composition and the thin film growth process were systematically studied as a function of deposition parameters. At high RF-power (~8 W/cm2), we observe surface etching at the center of the silicon wafer (~5.08 cm2). However, deposition of the thin film was possible in regions outside this etching zone. The key to achieve stoichiometric SrTiO3 thin film deposition at the axis-center was by controlling both deposition pressure and oxygen concentration, it minimized re-sputtering of the negative oxygen ions on the substrate surface. Polycrystalline growth of SrTiO3 thin films on platinized silicon substrates was optimized systematically and further extended to the deposition of polycrystalline SrTiO3 on MgO substrates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic and Structural Properties of Oxides · Multiferroics and related materials · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. J.F. Scott, C.A.P. Dearaujo, Ferroelectric memories, Science, 246 (1989) 1400–1405.10.1126/science.246.4936.1400 ↗
2. Polarization reversal in BaTiO3 nanostructures synthesized by microwave-assisted hydrothermal method10.1016/j.jallcom.2016.01.145 ↗
3. Resistive switching in metal–ferroelectric–metal junctions10.1063/1.1627944 ↗
4. Physics and Applications of Bismuth Ferrite10.1002/adma.200802849 ↗
5. Thermoelectric ceramics for energy harvesting10.1111/jace.12076 ↗
6. dc field and temperature dependent acoustic resonances in parallel-plate capacitors based on SrTiO3 and Ba0.25Sr0.75TiO3 films: Experiment and modeling10.1063/1.2209727 ↗
7. Temperature dependent optical dispersion and electronic transitions of highly a-axis oriented 0.8Pb(Zn 1/3 Nb 2/3)O3 -0.2PbTiO3 films on SrTiO3 crystals: An ellipsometric evidence10.1016/j.tsf.2016.01.038 ↗
8. Nanoscale resistive switching in SrTiO3 thin films, physica status solidi (RRL)
9. Realization of single-termination SrTiO3 (100) surfaces by a microwave-induced hydrothermal process10.1063/1.4831681 ↗
10. Surface preparation of (110) oriented pure and Nb doped SrTiO3 single crystal substrates by microwave assisted hydrothermal method10.1016/j.surfcoat.2015.10.046 ↗
11. Nonvolatile Resistive Switching in Pt/LaAlO3/SrTiO3 Heterostructures
12. Interface takes charge over Si10.1038/nmat2965 ↗
13. Orientation and crystal structure of SrTiO3 thin films prepared by pulsed laser deposition10.1143/JJAP.34.254 ↗
14. Effect of dc electric field on the effective microwave surface impedance of YBa2Cu3O7/SrTiO3/YBa2Cu3O7 trilayers10.1063/1.110202 ↗
15. Two-dimensional growth of SrTiO3 thin films on (001) MgO substrates using pulsed laser deposition and reflection high energy electron diffraction10.1063/1.3254182 ↗
16. Growth and post-deposition treatments of SrTiO3 films for dye-sensitized photoelectrosynthesis cell applications10.1021/acsami.6b01289 ↗
17. Atomic layer deposition of SrTiO3 thin films with highly enhanced growth rate for ultrahigh density capacitors10.1021/cm2002572 ↗
18. Process–property relationship in high-kALD SrTiO3 and BaTiO3: a review10.1039/C6TC05158H ↗
19. Preparation and electrical properties of SrTiO3 thin films deposited by liquid source metal- organic chemical vapor deposition (MOCVD)10.1143/JJAP.35.4890 ↗
20. (100)-Oriented SrTiO3/BaTiO3 artificial superlattices fabricated by chemical solution deposition10.1021/cg200713c ↗
21. Controlled crystalline orientation of SrTiO3 thin films grown on Pt(111)/Ti/α-Al2O3(0001) substrates: effect of growth temperature and Ti layer thickness10.1016/j.apsusc.2014.04.186 ↗
22. X-ray analysis of strain distribution in two-step grown epitaxial SrTiO3 thin films10.1063/1.4892827 ↗
23. Laser molecular beam epitaxy growth and properties of SrTiO3 thin films for microelectronic applications10.1016/j.tsf.2005.12.297 ↗
24. Epitaxy of SrTiO3 on silicon: the knitting machine strategy10.1021/acs.chemmater.6b01260 ↗
25. Sr/Ti ratio dependence of the dielectric properties of SrTiO3 thin films prepared by sol-gel method10.1023/A:1018561611459 ↗
26. Flexoelectricity in barium strontium titanate thin film10.1063/1.4898139 ↗
27. Oriented growth of SrTiO3 thin films on Si substrate by radio frequency magnetron sputtering10.1088/0022-3727/27/4/029 ↗
28. Infrared properties of epitaxial SrTiO3 thin films on MgO(001) substrates
29. Resputtering effects on the stoichiometry of YBa2Cu3Ox thin films10.1063/1.347727 ↗
30. Resputtering of the superconducting Bi-Sr-Ca-Cu-O thin films10.1016/0921-4534(95)00538-2 ↗
31. Sputter process diagnostics by negative ions10.1063/1.367325 ↗
32. Growth parameter effect in superconducting YBa2Cu4O8 thin films by d.c. magnetron sputtering10.1007/BF00349952 ↗
33. Effects of plasma non-homogeneity on the physical properties of sputtered thin film10.1016/S0257-8972(01)01258-0 ↗
34. Effects of deposition conditions on stoichiometry of off-axisRF sputtered BiSrCaCuO thin films10.1109/77.233372 ↗
35. On-axis radio frequency magnetron sputtering of stoichiometric BaTiO3 target: Localized re-sputtering and substrate etching during thin film growth10.1016/j.tsf.2015.07.065 ↗
36. Production of Atomic-OxygenNegative-Ion Beam by Positive Ion-Induced Sputtering of Semiconductive BaTiO3 Ceramic10.1143/JJAP.23.1640 ↗
37. Stoichiometry control of magnetron sputtered Bi2Sr2Ca1−xYxCu2Oy (0⩽x⩽0.5) thin film, composition spread libraries: Substrate bias and gas density factors10.1016/j.physc.2005.06.002 ↗
38. Energy dependence of ion-induced sputtering yields from monatomic solids at normal incidence10.1006/adnd.1996.0005 ↗