Atmospheric pressure PECVD of SiO2 thin film at a low temperature using HMDS/O2/He/Ar
Source abstract
Abstract
SiO 2 -like thin films were deposited at a low temperature (<50 °C) by a remote-type, atmospheric pressure plasma enhanced chemical vapor deposition (AP-PECVD) using a pin-to-plate-type, dielectric barrier discharge with gas mixtures containing hexamethyldisilazane (HMDS)/O 2 /He/Ar. The film characteristics were investigated according to the HMDS and O 2 flow rates. To obtain a more SiO 2 -like thin film, an adequate combination of HMDS and oxygen flow rates was required to remove the ―(CH 3 ) x bonding in the HMDS and to oxidize the Si in HMDS effectively. At the optimized flow rates, the surface roughness of the SiO 2 -like thin film was also the lowest. By using HMDS (50 sccm) and O 2 (500 sccm) flow rates in the gas mixture of HMDS/O 2 /He (2 slm)/Ar(600 sccm), SiO 2 -like thin films with a low impurity (<6.35% C) were obtained ata deposition rate of approximately 10.7 nm/min.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Copper Interconnects and Reliability · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.