Etching process optimization using NH4Cl aqueous solution to texture ZnO:Al films for efficient light trapping in flexible thin film solar cells
Source abstract
Abstract
Abstract 0.5 μm-thick aluminum-doped zinc oxide (ZnO:Al) films were deposited at 100 °C on polyethylene terephthalate substrates by Radio Frequency magnetron sputtering. The as-deposited films were compact and dense, showing grain sizes of 32.0 ± 6.4 nm and resistivities of (8.5 ± 0.7) × 10 − 4 Ω cm. The average transmittance in the visible wavelength range of the structure ZnO:Al/PET was around 77%. The capability of a novel two-step chemical etching using diluted NH 4 Cl aqueous solution to achieve efficient textured surfaces for light trapping was analyzed. The results indicated that both the aqueous solution and the etching method resulted appropriated to obtain etched surfaces with a surface roughness of 32 ± 5 nm, haze factors at 500 nm of 9% and light scattering at angles up to 50°. To validate all these results, a commercially ITO coated PET substrate was used for comparison.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Thin-Film Transistor Technologies · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.