Characterization of amorphous p-type transparent CuFeO2 thin films prepared by radio frequency magnetron sputtering method at room temperature
Source abstract
Abstract
Abstract Amorphous CuFeO 2 thin films were prepared on Al 2 O 3 (001) substrates by radio-frequency magnetron sputtering method at room temperature. Various oxygen partial pressures P O in the sputtering gas ambient (9.1%, 11.1% and 13.0%) were used in the deposition experiments. X-ray photoelectron spectroscopy analysis convinced the chemical state of Cu + and Fe 3 + in the films, and the chemical compositions of the thin films are close to the stoichiometry of CuFeO 2 . The content of oxygen composition increased systematically with increasing P O . From the optical transmission spectra, only one absorption edge could be observed during 200–1200 nm for all the films with a band gap around 3.25 eV. This result is different from the polycrystalline CuFeO 2 films which have 3 absorption edges in the range of 200–1200 nm. This interesting result indicates that amorphous CuFeO 2 thin films have much different electronic energy band with polycrystalline ones. The resistivity of the films first decreases and then increases with increasing P O . The minimum resistivity of 4.2 Ω cm with optical transmittance of 47% at 600 nm is obtained for the film deposited in P O = 11.1%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.