journal article·2018-01

A novel bilayer photoanode made of carbon nanotubes incorporated TiO2 nanorods and Mg2+ doped TiO2 nanorods for flexible dye-sensitized solar cells

Lixin Song, Jifeng Zhai, Pingfan Du, Jie Xiong, Frank Ko

Thin Solid Films· Volume 646
Publisher page

Abstract

Abstract TiO2 nanorods (NRs), Mg2 + doped TiO2 (Mg2 +/TiO2) NRs, and carbon nanotubes incorporated TiO2 (CNTs/TiO2) NRs are fabricated from the corresponding electrospun nanofibers (NFs) by ultrasonic treatment, respectively. Then these NRs are made into various photoanodic films through electrospray deposition and hot-compression for flexible dye-sensitized solar cells (FDSSCs). The conversion efficiency of FDSSCs is improved with the CNTs incorporation or the Mg2 + ions doping of TiO2. To further improve the properties of FDSSCs, various bilayer photoanodic films made of the smaller diameter NRs as under-layer and the larger diameter NRs as over-layer are prepared. Finally, a highest conversion efficiency of 3.9% is obtained using the bilayer NRs film composed of the smaller diameter CNTs/TiO2 NRs and the larger diameter Mg2 +/TiO2 NRs. This efficiency is much higher than that of the single-layer NRs film based FDSSCs. This may be attributed to the increased light harvesting resulting from the scattering layer of the larger diameter NRs and the faster electron transport due to the two-level energy steps of the bilayer NRs film.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. Dye-sensitized solar cells10.1021/cr900356p ↗
3. Recent advances in dye-sensitized solar cells: from photoanodes, sensitizers and electrolytes to counter electrodes10.1016/j.mattod.2014.09.001 ↗
4. Highly-efficient dye-sensitized solar cells with collaborative sensitization by silyl-anchor and carboxy-anchor dyes10.1039/C5CC06759F ↗
5. Comparing electron recombination via interfacial modifications in dye-sensitized solar cells10.1021/am505742y ↗
6. Effects of microwave condition on the formation and characteristics of TiO2 submicron-sized beads and its use in all-plastic flexible dye-sensitized solar cells10.1016/j.solmat.2015.08.013 ↗
7. Surface modification of titania aerogel films by oxygen plasma treatment for enhanced dye adsorption10.1016/j.tsf.2015.10.071 ↗
8. Dye-sensitized solar cell based on TiO2 nanotube and shelled arrayed structures10.1016/j.electacta.2016.03.191 ↗
9. Hybrid TiO2–multiwall carbon nanotube (MWCNTs) photoanodes for efficient dye sensitized solar cells (DSSCs)10.1016/j.solmat.2015.04.004 ↗
10. Plasmonic effect of Ag@TiO2 core–shell nanocubes on dye-sensitized solar cell performance based on reduced graphene oxide–TiO2 nanotube composite10.1016/j.tsf.2015.10.013 ↗
11. Doping of TiO2 for sensitized solar cells10.1039/C5CS00352K ↗
12. Nanostructured photoelectrodes for dye-sensitized solar cells10.1016/j.nantod.2010.12.007 ↗
13. Preparation of TiO2-based nanotubes/nanoparticles composite thin film electrodes for their electron transport properties
14. Resonant multiple light scattering for enhanced photon harvesting in dye-sensitized solar cells10.1002/adma.201400124 ↗
15. Electrospun TiO2 nanorods with carbon nanotubes for efficient electron collection in dye-sensitized solar cells
16. Multifunctional Ag-decorated porous TiO2 nanofibers in dye-sensitized solar cells: efficient light harvesting, light scattering, and electrolyte contact10.1002/chem.201305071 ↗
17. Effects of hydrochloric acid treatment of TiO2 nanoparticles/nanofibers bilayer film on the photovoltaic properties of dye-sensitized solar cells10.1016/j.materresbull.2012.11.094 ↗
18. TiO2/Nb2O5 core–sheath nanofibers film: co-electrospinning fabrication and its application in dye-sensitized solar cells10.1016/j.elecom.2012.09.013 ↗
19. Enhancement of carrier mobility by electrospun nanofibers of Nb-doped TiO2 in dye sensitized solar cells10.1016/j.electacta.2013.05.037 ↗
20. Fabrication of a dye-sensitized solar cell containing a Mg-doped TiO2 electrode and a Br3−/Br− redox mediator with a high open-circuit photovoltage of 1.21V10.1039/C2CC36873K ↗
21. Charge recombination and band-edge shift in the dye-sensitized Mg2+-doped TiO2 solar cells10.1021/jp2024318 ↗
22. Recent advances in sensitized mesoscopic solar cells
23. Application of a bilayer TiO2 nanofiber photoanode for optimization of dye-sensitized solar cells10.1002/adma.201102717 ↗
24. Charge transport and recombination in dye-sensitized solar cells on plastic substrates10.1021/jp503622h ↗
25. One-step growth of well-aligned TiO2 nanorod arrays for flexible dye-sensitized solar cells10.1039/C4CC09083G ↗
26. Progress in flexible dye solar cell materials, processes and devices10.1039/C4TA00902A ↗
27. Fabrication of flexible dye sensitized solar cells on plastic substrates10.1016/j.nanoen.2012.10.004 ↗
28. Low-temperature fabrication of TiO2 electrodes for flexible dye-sensitized solar cells using an electrospray process10.1021/am3007164 ↗
29. Electrophoretic deposition of TiO2 coatings for use in all-plastic flexible dye-sensitized solar cells10.1016/j.surfcoat.2015.07.044 ↗
30. A new method for manufacturing nanostructured electrodes on plastic substrates10.1021/nl0055254 ↗
31. Highly efficient plastic substrate dye-sensitized solar cells using a compression method for preparation of TiO2 photoelectrodes10.1039/b709911h ↗
32. Enhanced efficiency in flexible dye-sensitized solar cells by a novel bilayer phototanode made of carbon nanotubes incorporated TiO2 nanorods and branched TiO2 nanotubes10.1016/j.solmat.2015.12.002 ↗
33. Electrospinning: a fascinating method for the preparation of ultrathin fibers10.1002/anie.200604646 ↗
34. Dye-sensitized TiO2 solar cells based on nanocomposite photoanode containing plasma-modified multi-walled carbon nanotubes10.1002/pip.2174 ↗
35. Dye-sensitized solar cells based on anatase TiO2 hollow spheres/carbon nanotube composite films10.1016/j.jpowsour.2011.05.014 ↗
36. Preparation and properties of a carbon nanotube-based nanocomposite photoanode for dye-sensitized solar cells10.1088/0957-4484/19/37/375305 ↗
37. Sn-doped TiO2 photoanode for dye-sensitized solar cells10.1021/jp212517k ↗
38. Photocatalytic degradation of monocrotophos pesticide—an endocrine disruptor by magnesium doped titania10.1016/j.jhazmat.2010.11.132 ↗
39. Oxide semiconductors in photoelectrochemical conversion of solar energy10.1016/0038-092X(80)90405-3 ↗
40. Influence of a TiCl4 post-treatment on nanocrystalline TiO2 films in dye-sensitized solar cells10.1021/jp061346k ↗
41. Co-sensitization of TiO2-MWCNTs hybrid anode for efficient dye-sensitized solar cells10.1016/j.electacta.2015.05.132 ↗
42. Rice grain-shaped TiO2–CNT composite—a functional material with a novel morphology for dye-sensitized solar cells10.1016/j.jphotochem.2012.01.002 ↗
43. High-efficiency solid-state dye-sensitized solar cells based on TiO2-coated ZnO nanowire arrays10.1021/nl3004144 ↗
44. Influences of different TiO2 morphologies and solvents on the photovoltaic performance of dye-sensitized solar cells10.1016/j.jpowsour.2008.12.002 ↗
45. Photovoltaic performance improvement of dye-sensitized solar cells based on Mg-doped TiO2 thin films10.1016/j.electacta.2014.02.129 ↗
46. High-efficiency, solid-state, dye-sensitized solar cells using hierarchically structured TiO2 nanofibers10.1021/am200092j ↗
47. Controlled electron injection and transport at materials interfaces in dye sensitized solar cells10.1016/j.mser.2008.09.001 ↗
48. Kinetic resolution of charge recombination and electric fields at the sensitized TiO2 interface10.1021/acs.jpcc.5b08617 ↗
49. Mesoporous (N,S)-codoped TiO2 nanoparticles as effective photoanode for dye-sensitized solar cells10.1016/j.jallcom.2011.08.072 ↗