article·2008-05-09

Characterization of cuprous oxide films prepared by post-annealing of cupric oxide using an atmospheric nitrogen pressure plasma torch

Sheng Han, Hongying Chen, Lien-Teng Kuo, Cheng‐Hsien Tsai

Publisher page

Abstract

Cuprous oxide films were prepared by the post-annealing of cupric oxide using an atmospheric pressure microwave plasma torch. Metallic copper films were deposited on glass substrate by magnetron sputtering. Then the films were annealed in air at 500 °C for 12 h, and the formation of cupric oxide observed. The annealed films were further treated by nitrogen plasma at a power of 800 W for 10 and 20 min. The color of the film clearly changed from black to reddish brown over 10 min. X-ray diffraction patterns show that the annealed films were cupric oxide and included cuprous oxide diffraction peaks observed aftert 10 min in nitrogen plasma. The resistivity of annealed films was 16.7 Ω cm, and was reduced markedly to about one order of magnitude under nitrogen plasma. Annealing in air and nitrogen plasma treating shifted the optical band gap from 2.1 eV to 2.4 eV. The relationship between the microstructure and plasma content of the films and their properties is investigated. © 2008 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.