Influence of the acetic acid concentration on the growth of zinc oxide thin films prepared by spray pyrolysis of aqueous solutions
Source abstract
Abstract
Abstract Zinc oxide (ZnO) thin films were fabricated by ultrasonic spray pyrolysis using aqueous zinc acetate solutions. Acetic acid was added as a stabilizing agent in the concentration range of 0.1 to 10 vol.% and its effects on the morphology and electrical and optical properties of the thin films were investigated. The increase of acetic acid in the solution led to more (001)-textured films and influenced the grain size and roughness. While this did not result in a significant difference in the optical transmission characteristics, a strong dependence in the electrical properties of the films could be observed. After illumination under a sun simulator with an AM1.5G spectrum, the films presented a resistivity in the range of 0.2–9 Ω cm, with the lowest resistivity obtained for acetic acid concentration of 2 vol.%. The deposited films showed average optical transmittance higher than 80% (including the glass substrate) for wavelengths between 400 and 1000 nm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.