article·2009-08-20

Enhanced characterization of ITO films deposited on PET by RF superimposed DC magnetron sputtering

S.I. Kim, T.D. Jung, Pung Keun Song

Publisher page

Abstract

Abstract Tin-doped indium oxide (ITO) films were deposited on polyethylene terephthalate substrates by RF superimposed DC magnetron sputtering using an ITO target composed of In 2 O 3 (90 wt.%):SnO 2 (10 wt.%). The total sputtering power was maintained at 70 W and the power ratio of RF/(RF + DC) was varied from 0 to 100% in steps of 25%. The discharge voltage and deposition rate decreased with increasing RF/(RF + DC) power ratio. The ITO film deposited at a 50% RF portion of the total power showed the lowest resistivity (3.18 × 10 − 4 Ωcm), high transmittance (87.5%) and relatively good mechanical durability, which was evaluated using bending and scratch tests.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Advanced Sensor and Energy Harvesting Materials · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.