journal article·2015-06

Effect of Pd(P) thickness on the soldering reaction between Sn–3Ag–0.5Cu alloy and ultrathin-Ni(P)-type Au/Pd(P)/Ni(P)/Cu metallization pad

C.E. Ho, L.H. Hsu, C.H. Yang, T.C. Yeh, P.T. Lee

Thin Solid Films· Volume 584
Publisher page

Abstract

Abstract The strong effect of the Pd(P) thickness ( δ Pd(P) ) on the interfacial reaction between Sn–3Ag–0.5Cu solder and ultrathin-Ni(P)-type Au/Pd(P)/Ni(P)/Cu pad was revealed. We observed that the P of the Pd(P) film would redeposit over the Ni(P) platings and formed layered Ni 2 SnP in the early stage of soldering reaction. An excessive growth of Ni 2 SnP inhibited the formation of layered (Cu,Ni) 6 Sn 5 , which is argued to be an effective diffusion barrier of Ni. Thus, an extremely fast depletion of the Ni(P) film accompanied by a substantial dissolution of the Cu pad might be induced for large δ Pd(P) . These observations demonstrated that δ Pd(P) plays a dominant role in determining the interfacial microstructure of solder joints and that a precise control on the δ Pd(P) value is required for microelectronic packaging reliability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Optimal Ni(P) thickness design in ultrathin-ENEPIG metallization for soldering application concerning electrical impedance and mechanical bonding strength10.1016/j.msea.2014.05.049 ↗
2. EM modeling of microstrip conductor losses including surface roughness effect10.1109/LMWC.2006.890326 ↗
3. Surface finish effects on high-speed signal degradation10.1109/TADVP.2007.914962 ↗
4. Microstructural variation and high-speed impact responses of Sn–3.0Ag–0.5Cu/ENEPIG solder joints with ultra-thin Ni–P deposit10.1007/s10853-012-7070-2 ↗
5. Optimization of the Ni(P) thickness for an ultrathin Ni(P)-based surface finish in soldering applications10.1007/s11664-013-2664-2 ↗
6. Pronounced effects of Ni(P) thickness on the interfacial reaction and high impact resistance of the solder/Au/Pd(P)/Ni(P)/Cu reactive system10.1016/j.surfcoat.2014.04.027 ↗
7. Quantifying the dependence of Ni(P) thickness in ultrathin-ENEPIG metallization on the growth of Cu–Sn intermetallic compounds in soldering reaction10.1016/j.matchemphys.2014.06.072 ↗
8. Influence of palladium thickness on the soldering reactions between Sn–3Ag–0.5Cu and Au/Pd(P)/Ni(P) surface finish10.1007/s11664-010-1351-9 ↗
9. Effects of Pd(P) thickness on the microstructural evolution between Sn–3Ag–0.5Cu and Ni(P)/Pd(P)/Au surface finish during the reflow process10.1007/s11664-012-2320-2 ↗
10. Effect of Pd thickness on the interfacial reaction and shear strength in solder joints between Sn–3.0Ag–0.5Cu solder and electroless nickel/electroless palladium/immersion gold (ENEPIG) surface finish10.1007/s11664-012-1921-0 ↗
11. Field-emission transmission electron microscopy study of the reaction sequence between Sn–Ag–Cu alloy and an amorphous Pd(P) thin film in microelectronic packaging10.1016/j.tsf.2012.07.076 ↗
12. Comparative study between Sn37Pb and Sn3Ag0.5Cu soldering with Au/Pd/Ni(P) tri-layer structure10.1016/j.jallcom.2009.12.119 ↗
13. Strategies for fabricating atom probe specimens with a dual beam FIB10.1016/j.ultramic.2004.10.011 ↗
14. Intermetallic compound formation between Sn–3.5Ag solder and Ni-based metallization during liquid state reaction10.1016/j.tsf.2004.05.058 ↗
15. Solid state interfacial reaction of Sn–37Pb and Sn–3.5Ag solders with Ni–P under bump metallization10.1016/j.actamat.2003.12.042 ↗
16. Interfacial reaction issues for lead-free electronic solders10.1007/s10854-006-9031-5 ↗
17. Effect of Cu content on the mechanical reliability of Ni/Sn–3.5Ag system10.1557/jmr.2007.0085 ↗
18. Formation of intermetallic compounds between liquid Sn and various CuNix metallizations10.1007/s11664-008-0411-x ↗
19. Effect of Cu concentration, solder volume, and temperature on the reaction between SnAgCu solders and Ni10.1016/j.jallcom.2010.03.168 ↗
20. Sn–Ag–Cu solder reaction with Au/Pd/Ni(P) and Au/Pd(P)/Ni(P) platings10.1016/j.tsf.2012.12.070 ↗
21. Ni interdiffusion coefficient and activation energy in Cu6Sn510.1007/s11664-011-1821-8 ↗
22. The effects of solder volume and Cu concentration on the consumption rate of Cu pad during reflow soldering10.1016/j.jallcom.2009.11.088 ↗
23. Thermal and electrical properties of copper‐tin and nickel‐tin intermetallics10.1063/1.351487 ↗