journal article·2019-07

Electrochromic properties of tungsten oxide films prepared by sparking method using external electric field

W. Thongpan, D. Louloudakis, P. Pooseekheaw, T. Kumpika, E. Kantarak, A. Panthawan, A. Tuantranont, W. Thongsuwan, P. Singjai

Thin Solid Films· Volume 682
Publisher page

Abstract

Abstract In this paper, high porous tungsten oxide (WO3) films were prepared onto indium-doped tin oxide glass substrates by a sparking method, which is a simple and cost-effective technique. An external electric field of 6 kV/cm was applied to the sparking system in order to increase a dense surface morphology and the deposition rate of the films. In experiments, the films were deposited for 20 min at room temperature and post-annealed from 200 to 500 °C for 1 h under atmospheric pressure. High porosity of the WO3 films was fabricated by the sparking method and confirmed by scanning with electron microscopy. Raman spectra and X-ray diffraction patterns show the monoclinic phase of WO3 when the annealing temperature is higher than 300 °C. In addition, the electrochemical analysis was carried out by using a 0.05 M H2SO4 electrolyte solution, Pt as a counter electrode, and Ag/AgCl as a reference electrode. The fast switching speeds of 1.2 s and 2.6 s (for the coloration and bleaching state respectively), optical modulation of 16.3%, and coloration efficiency of 49.6 cm2/C were achieved for annealed films at 300 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Transition Metal Oxide Nanomaterials · Gas Sensing Nanomaterials and Sensors · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. U.S. Department of Energy · 2011
2. AlN–Ag based low-emission sputtered coatings for high visible transmittance window10.1016/j.surfcoat.2015.12.015 ↗
3. A broadband transparent window in a continuous metal film coated with double layer hybrid dielectric gratings10.1016/j.optcom.2017.07.013 ↗
4. Measured overall heat transfer coefficient of a suspended particle device switchable glazing10.1016/j.apenergy.2015.09.019 ↗
5. Liquid crystale Based flexible smart windows on roll-to-roll slot die-Coated Ag nanowire network films10.1016/j.jallcom.2018.06.285 ↗
6. Granqvist · 1995
7. Electrochromics for energy efficient buildings: towards long-term durability and materials rejuvenation10.1016/j.surfcoat.2016.02.031 ↗
8. Electrochromics for smart windows: oxide-based thin films and devices10.1016/j.tsf.2014.02.002 ↗
9. Raman spectroscopic studies of electrochromic a-WO310.1016/S0013-4686(99)00027-4 ↗
10. Oxide electrochromics: an introduction to devices and materials10.1016/j.solmat.2011.08.021 ↗
11. Experimental study on property and electrochromic function of stacked WO3/Ta2O5/NiO films by sputtering10.1016/j.tsf.2018.06.041 ↗
12. High performing smart electrochromic device based on honeycomb nanostructured h-WO3 thin films: hydrothermal assisted synthesis10.1039/C4DT02953D ↗
13. Effect of deposition temperature on the electrochromic properties of WO3 grown by LPCVD10.5185/amlett.2018.1823 ↗
14. Electron transport and electrochromic properties of sol-gel WO3 thin films:effect of crystallinity10.1016/j.tsf.2018.03.011 ↗
15. High-coloration efficiency Electrochromic device based on novel porous TiO2@Prussian blue Core-Shell nanostructures10.1016/j.electacta.2016.12.044 ↗
16. Preparation of a porous NiO array-patterned film and its enhanced electrochromic performance10.1039/C8TC00367J ↗
17. Atomic force microscopy imaging of ZnO nanodots deposited on quartz by sparking off different tip shapes10.1002/sia.2507 ↗
18. Novel spark method for deposition of metal oxide thin films: deposition of hexagonal tungsten oxide
19. External-electric-field-enhanced uniformity and deposition rate of a TiO2 film prepared by the sparking process10.15407/ujpe63.6.531 ↗
20. New developments in spark production of nanoparticles10.1016/j.apt.2013.12.005 ↗
21. Transmission attenuation and chromic contrast characterization of R.F. sputtered WO3 thin films for electrochromic device applications10.1016/j.electacta.2012.08.093 ↗
22. Electrochromic properties of nanocrystalline WO3 thin films grown on flexible substrates by plasma-assisted evaporation technique10.1007/s00339-010-5681-5 ↗
23. Characterization of electrodeposited WO3 films and its application to electrochemical wastewater treatment10.1016/S0013-4686(02)00435-8 ↗
24. One-pot synthesis of WO3 structures at 95 C using HCl10.1007/s10971-014-3459-5 ↗
25. Structure, optical and electrical properties of indium tin oxide ultra thin films prepared by jet nebulizer spray pyrolysis technique10.1016/j.jascer.2016.01.001 ↗
26. Photoelectrocatalytic reduction of CO2 into formic acid using WO3−x/TiO2 film as novel photoanode10.1016/S1003-6326(16)64376-5 ↗
27. Modified Scherrer equation to estimate more accurately nano-crystallite size using XRD10.4236/wjnse.2012.23020 ↗
28. Toward plastic smart windows: optimization of indium tin oxide electrodes for the synthesis of electrochromic devices on polycarbonate substrates10.1021/acsami.6b00988 ↗
29. Improved electrochromic performance of ordered tungsten oxide films for IR electrochromic device10.1016/j.solmat.2012.01.028 ↗
30. Influence of substrate temperature on growth and Electrochromic properties of WO3 thin films10.1016/j.ijleo.2018.08.028 ↗
31. Enhanced electrochromic performance of 2D grid-structured WO3 thin films10.1016/j.tsf.2018.03.044 ↗
32. A simple method for the fabrication of WO3 films with electrochromic and photocatalytic properties10.1016/j.tsf.2014.10.087 ↗