article·2004-07-06

Characterization of low-k dielectric trench surface cleaning after a fluorocarbon etch

Serena Y. Tan, Simon Y.M. Chooi, Chian-Yuh Sin, Ping-Yu Ee, Madhavi Srinivasan, Simo O. Pehkonen

Publisher page

Abstract

Abstract The cleaning process of low-k dielectric trench structures used in sub-0.13 μm technology was investigated. These trenches were fabricated from silicon carbide, silicon oxide and CVD SiCOH low-k film using a fluorocarbon etching chemistry. The compared cleaning methods include N2/H2 plasma treatment, semi-aqueous organic strippers, dilute HF and combinations of plasma treatment and the aforementioned chemicals. Angle-resolved X-ray photoelectron spectroscopy (XPS) was used to investigate the nature and quantity of the contaminants deposited on the copper surfaces at the bottom of the trenches and on the dielectric sidewalls. Significant Cu-, C-, F- and O-containing contaminants were found on both the copper surface at the trench bottoms and the dielectric sidewalls after etching. The cleaning treatments were generally found to be ineffective when used individually. On the contrary, a two-step approach, viz. N2/H2 plasma treatment followed by wet clean was found to give favorable removal of contaminants.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Copper Interconnects and Reliability · Electron and X-Ray Spectroscopy Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.