article·2014-02-14

Resistive switching in TiO2-based metal–insulator–metal structures with Al2O3 barrier layer at the metal/dielectric interface

Boris Hudec, A. Paskaleva, Peter Jančovič, J. Dérer, J. Fedor, A. Rosová, Edmund Dobročka, K. Fröhlich

Publisher page

Abstract

Abstract In this work we systematically study the effect of the Al 2 O 3 barrier layer thickness on the resistive switching properties of Al 2 O 3 /TiO 2 bilayer grown by atomic layer deposition in the Pt/Al 2 O 3 /TiO 2 /TiN stacks. It was found that an Al 2 O 3 layer of a certain thickness is essential to stabilize the resistive switching parameters while these can be further tuned by current compliance during SET. A two-step forming process was required to achieve stable repetitive bipolar switching loops. The endurance of 10 4 readings of alternating resistance states was obtained for structures with 3 and 4 nm of Al 2 O 3 during pulsed measurements. Forming was performed also at elevated temperatures using constant voltage stress. It was found that the switching is filamentary and happens in the Al 2 O 3 layer while TiO 2 is acting as an oxygen vacancy reservoir.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Memory and Neural Computing · Ferroelectric and Negative Capacitance Devices · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.