article·2016-09-18

Influence of the ZnO:Al dispersion on the performance of ZnO:Al/Ag/ZnO:Al transparent electrodes

Astrid Bingel, Martin Steglich, Philipp Naujok, Robert Müller, Ulrike Schulz, Norbert Kaiser, Andreas Tünnermann

Publisher page

Abstract

Abstract Highly transparent and conductive Al-doped ZnO/Ag/Al-doped ZnO (AZO/Ag/AZO) multilayers were prepared by industrial inline DC magnetron sputtering on glass substrates at room temperature. With optimized film thicknesses of 37 nm/10 nm/37 nm, an optimized low sheet resistance of only 6 Ω/sq. and high transmittances of T 550 = 87.4% at 550 nm and T 400–800 = 79.9% in the spectral range between 400 nm and 800 nm were reached. Furthermore, an increase of the AZO/Ag/AZO-performance was achieved when a small amount of oxygen was added to the process gas during the AZO deposition which was found to be because of a beneficial adjustment of the AZO dispersion. In this way, owing to both a decreased extinction coefficient as well as a higher refractive index of the AZO film, the maximum transmittance of the AZO/Ag/AZO three-layer structure is further increased ( T 550 = 89.0%) and the bandwidth of the transmittance range is broadened ( T 400–800 = 83.3%). With the adaption of the AZO dispersion a very high Figure-of-Merit (Haacke) Φ 400–800 = 26.2 mΩ − 1 and Φ 550 = 52.9 mΩ − 1 was achieved by industrial inline DC magnetron sputtering process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Copper-based nanomaterials and applications · Gas Sensing Nanomaterials and Sensors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.