In situ phase evolution study in magnetron sputtered tantalum thin films
Source abstract
Abstract
Abstract The design and construction of a planar magnetron sputter deposition system with a beryllium chamber has been accomplished to perform in situ X-ray diffraction growth study of refractory coatings. The deposition system sits on top of a laboratory θ–2θ X-ray diffractometer. A 2D array detector was interfaced for observation of the Debye rings during growth. Integration along the 2θ and χ directions allows fast phase and texture determination. Two sputter depositions of tantalum films onto glass substrate in argon gas are reported, one was deposited at 25 mm target–detector distance, 3.9 Pa argon gas, and the other at 108 mm target–detector distance and 1.3 Pa argon gas. The first film grew to 250 nm in 39 min at an average growth rate of 6.4 nm/min. It consisted of 45 nm of interface layer, which showed no crystalline structure, followed by 15-nm growth of β-tantalum, followed by 190-nm growth of α-tantalum. From the full-width-half-maximum of the χ-plot, it was determined that β-tantalum was 〈0 0 2〉 textured, and α-tantalum was 〈1 1 0〉 textured and grew more textured with deposition time. The second film grew to 36 nm in 22 min at an average growth rate of 1.6 nm/min. It consisted of 31 nm of layer, which showed no crystalline structure, followed by 5 nm of surface layer of β- and α-tantalum. Ex situ grazing incidence X-ray diffraction performed on the film surface confirmed the in situ results. Ex situ pole figure analysis showed: 〈1 1 0〉 fiber texture in α-tantalum, and highly 〈0 0 2〉 texture in β-tantalum.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Semiconductor materials and devices · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.