All oxide ultraviolet photodetectors based on a p-Cu2O film/n-ZnO heterostructure nanowires
Source abstract
Abstract
Abstract All-oxide ultraviolet (UV) photodetectors based on a p-Cu 2 O thin film and n-ZnO nanowires were fabricated on Corning glass substrates. The p-Cu 2 O film was fabricated by a sol–gel method and two-step thermal treatment on the ZnO nanowire arrays grown on ZnO doped with 5 at.% Al bottom electrode/glass for the formation of a p–n diode. The sol–gel coating of a Cu 2 O layer produced the thin p-Cu 2 O film with good uniformity on the ZnO nanowires and polycrystals with the (111) preferred orientation. It resulted in continuous interconnection of the ZnO nanowire arrays despite the solution process. The current–voltage (I–V) characteristics of the fabricated p–n heterostructure showed a typical rectifying behavior with a current rise at about 2 V and an I (illumination)/I (dark) ratio of about 3.89 × 10 2 at − 6 V. The p-Cu 2 O/n-ZnO nanowire-based UV photodetectors show the responsivity of ~ 50 A/W with a peak position at 360 nm in reverse bias, together with weak photoresponse in the visible region. Consequently, we found that the introduction of the p-type Cu 2 O layer in the ZnO nanowire-based UV photodetectors provided effective all-oxide p–n junctions without degrading UV/visible selectivity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Ga2O3 and related materials · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.