article·2009-04-22

Deposition of WNxCy thin films for diffusion barrier application using the dimethylhydrazido (2−) tungsten complex (CH3CN)Cl4W(NNMe2)

Hiral M. Ajmera, Timothy J. Anderson, Jürgen Koller, Lisa McElwee‐White, D. P. Norton

Publisher page

Abstract

Tungsten nitride carbide (WNxCy) thin films were deposited by chemical vapor deposition using the dimethylhydrazido (2−) tungsten complex (CH3CN)Cl4W(NNMe2) (1) in benzonitrile with H2 as a co-reactant in the temperature range 300 to 700 °C. Films were characterized using X-ray diffraction (XRD), Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy and four-point probe to determine film crystallinity, composition, atomic bonding, and electrical resistivity, respectively. The lowest temperature at which growth was observed from 1 was 300 °C. For deposition between 300 and 650 °C, AES measurements indicated the presence of W, C, N, and O in the deposited film. The films deposited below 550 °C were amorphous, while those deposited at and above 550 °C were nano-crystalline (average grain size < 70 Å). The films exhibited their lowest resistivity of 840 µΩ-cm for deposition at 300 °C. WNxCy films were tested for diffusion barrier quality by sputter coating the film with Cu, annealing the Cu/WNxCy/Si stack in vacuum, and performing AES depth profile and XRD measurement to detect evidence of copper diffusion. Films deposited at 350 and 400 °C (50 and 60 nm thickness, respectively) were able to prevent bulk Cu transport after vacuum annealing at 500 °C for 30 min.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Semiconductor materials and devices · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.