article·2014-08-27

Low contact resistance carbon thin film modified current collectors for lithium Ion batteries

Shikun Chen, Kuo‐Feng Chiu, Shih-Hsuan Su, Shih‐Hsien Liu, Kai Hsiang Hou, Hoang‐Jyh Leu, Chung-Chun Hsiao

Publisher page

Abstract

Abstract Carbon films have been synthesized by chemical vapor deposition (CVD) on AISI 304 stainless steel (304SS) sheets with various C2H2/H2 flow ratios at 810 °C. The films exhibit three different morphologies and structures: filament, sphere and transition types at different C2H2/H2 flow ratios, as characterized by scanning electron microscopy, X-ray diffraction and Raman spectroscopy. It was found that the degree of graphitization increased with decreasing C2H2/H2 flow ratios. The carbon film modified 304SS sheets were used as cathode current collectors and coated with an active layer containing LiMn2O4 active materials, conducting additives and binders for lithium ion batteries. The electrochemical properties of these LiMn2O4 cells with bare and carbon film modified current collectors were investigated. Under high current operation, such as 3000 mA/g, the capacity of the LiMn2O4 cell with transition type carbon film modified current collector is 55% higher than the cell with bare current collector. The enhanced performances of high current density charge–discharge cycles can be attributed to the reduced contact resistance and improved charge transfer efficiency provided by the transition type carbon film modified current collectors.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.