journal article·2016-09

Structural and optical characterization of Cu2SnSe3 thin films prepared by SILAR method

Aykut ASTAM

Thin Solid Films· Volume 615
Publisher page

Abstract

Abstract Phase pure Cu2SnSe3 thin films were successfully obtained on glass substrates by annealing of successive ionic layer adsorption and reaction (SILAR) deposited thin films at 623 K for an hour in selenium atmosphere. Structural, morphological, compositional, and optical properties of films were investigated, before and after annealing, via X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX), Raman spectroscopy, and optical absorption measurements. XRD results showed that films were polycrystalline nature with cubic structure, the crystallinity was improved with annealing and the secondary phase of SnSe disappeared as well. SEM images revealed existence of the relatively big islands, which were formed overlapping large number of small grains, was observed on the surfaces. The images also showed a considerable change in the shape of the grains with annealing. EDAX measurements revealed that chemical composition of the annealed film was very close to the ideal value 2:1:3. The results of Raman measurement confirmed the formation of Cu2SnSe3 and disappearance of the secondary phase of SnSe after annealing. The optical absorption studies showed that the films have direct transitions with band gap energies of 1.38 eV and 1.34 eV before and after annealing, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Advanced Thermoelectric Materials and Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Crystal growth and structure, electrical, and optical characterization of the semiconductor Cu2SnSe310.1063/1.1383984 ↗
2. Thermoelectric properties of the Cu2SnSe3–Cu2GeSe3 solid solution10.1016/j.jallcom.2010.06.182 ↗
3. Hot-injection synthesis and characterization of monodispersed ternary Cu2SnSe3 nanocrystals for thermoelectric applications10.1016/j.jallcom.2013.07.119 ↗
4. Predicted formation reactions for the solid-state syntheses of the semiconductor materials Cu2SnX3 and Cu2ZnSnX4 (X=S, Se) starting from binary chalcogenides10.1016/j.tsf.2006.12.096 ↗
5. Earth-abundant Cu2SnSe3 thin film counter electrode for high-efficiency quantum dot-sensitized solar cells10.1016/j.jpowsour.2015.05.038 ↗
6. Growth and characterization of Cu2SnSe3 thin films10.1016/j.matchemphys.2005.07.050 ↗
7. Single-step sputtered Cu2SnSe3 films using the targets composed of Cu2Se and SnSe210.1016/j.tsf.2010.04.077 ↗
8. Influence of substrate and selenization temperatures on the growth of Cu2SnSe3 films10.1007/s10853-011-5661-y ↗
9. Temperature induced phase transformation in coevaporated Cu2SnSe3 thin films10.1016/j.matlet.2013.10.100 ↗
10. Control of composition and properties by the use of reflector wall in RF sputter deposition of Cu2ZnSnS4 thin films10.1016/j.tsf.2015.06.015 ↗
11. Effects of annealing treatment on the properties of CZTSe thin films deposited by RF-magnetron sputtering10.1016/j.jallcom.2014.11.132 ↗
12. Co-evaporated Cu2ZnSnSe4 films and devices10.1016/j.solmat.2012.01.008 ↗
13. Electrodeposited Cu2ZnSnSe4 thin film solar cell with 7% power conversion efficiency10.1002/pip.2332 ↗
14. Structural and optical properties of Cu2SnS3 sprayed thin films10.1016/j.tsf.2008.11.039 ↗
15. In and Al composition in nano-Cu(InAl)Se2 thin films from XRD and transmittance spectra10.1016/j.mseb.2007.03.011 ↗
16. Investigations on co-evaporated Cu2SnSe3 and Cu2SnSe3–ZnSe thin films10.1016/j.apsusc.2011.05.008 ↗
17. Growth and characterization of coevaporated Cu2SnSe3 thin films for photovoltaic applications10.1016/j.tsf.2013.03.119 ↗
18. Synthesis and characterization of thermally evaporated Cu2SnSe3 ternary semiconductor10.1016/j.optmat.2014.06.022 ↗
19. Effect of post-deposition annealing on the performance of D.C. sputtered Cu2SnSe3 thin films10.1016/j.surfcoat.2010.07.067 ↗
20. Solution deposition of thin solid compound films by a successive ionic-layer adsorption and reaction process10.1016/0378-5963(85)90241-7 ↗
21. Deposition of metal chalcogenide thin films by successive ionic layer adsorption and reaction (SILAR) method10.1007/BF02708491 ↗
22. Room temperature deposition of ZnSe thin films by successive ionic layer adsorption and reaction (SILAR) method10.1016/j.materresbull.2004.06.014 ↗
23. The diffraction of short electromagnetic waves by a crystal
24. Barret · 1980
25. The effect of potential on electrodeposited CdSe thin films10.1016/j.mssp.2011.10.007 ↗
26. Callister · 1997
27. High-temperature conductivity in chemical bath deposited copper selenide thin films10.1016/j.jcrysgro.2005.01.111 ↗
28. Solvothermal synthesis to Cu2SnSe4 nanocrystals at low temperature10.1016/S0167-2738(99)00245-3 ↗
29. Cu2Zn1−xCdxSn(Se1−ySy)4 solid solutions as absorber materials for solar cells10.1002/pssa.200776839 ↗
30. Raman spectrum of monoclinic semiconductor Cu2SnSe310.1016/j.ssc.2010.10.015 ↗
31. Infrared and Raman spectra of the IV–VI compounds SnS and SnSe10.1103/PhysRevB.15.2177 ↗
32. Three-dimensional quantum-size effect in chemically deposited cadmium selenide films10.1103/PhysRevB.36.4215 ↗
33. On some properties of I2–IV–VI3 compounds10.1002/pssa.2211000165 ↗
34. Influence of the substrate temperature on the structural, optical and electrical properties of tin selenide thin films deposited by thermal evaporation method10.1002/crat.200900424 ↗